TCT circular saw blade for cutting wood coating panel MDF

Features: fine hard carbide for blade tip, longer life, lower noise.

Application: fine cutting

Machine: for table saw, beam saw (reciprocating saw)

Cutting material: melamine board, chip board, coating chip board, MDF, plywood.

The most common types as below table, welcome to customize. 

1. Make sure the precision of machine guide and axis.

2. The size of inner and outer flanges size must be same, clean and flat.

3. Clean the saw blade before using, make sure the touching side has no rust and dirt.

4. Check the running direction is right, and make sure the fixing is tight enough.

5. Re-sharpen the blade in time, Do not use it immoderately. Do not change cutting angle when reparpening.

6. Clean the body and tip before re-sharpening.

7. Choosing the right grinding wheel when re-sharpening (grain and hardness). Make sure the sharpness and prevent the tips from chipping, use the cooling liquid.

8. When enlarging the bore, do not enlarge more than 20mm. Check the end jump to prevent the blade from off-center and then lower the quality. Do not enlarge the bore size on multi-rip saw.

9. Please use the CNC grinding machine to re-sharpening the blade, do not use hand operation to prevent accident.

Please tell us the cutting material and cutting ways, we'd like to recommend you right product.

1. Strict inspection after each process for cutter body thickness, size, flatness, angle, joint length, hardness. We promise to ship 100% qualified product.

2. Once the damage caused by shipping (the damages include broken teeth broken, unstable teeth, cracked body), we'd like to replace for you, please show us photo.

3. Except: the blade is not sharp when required grinding, broken blade by improper use, blade off, problems by self revising hole, unsuitable use purpose.

1.16 years manufacturing rich experience, five senior technical staff work harder on design, innovation, improvement and after-sales service.

2. The whole production lines complete cutting body, grinding, CNC, polishing, welding, quenching, milling, plating, inspection, and quality control.

3. Various types of products for all customers.

4. Strong R & D capability, welcome OEM, ODM order. Kenlar cutter is not only workable but also perfect. The fine divisions of products help users to decrease cost to minimum and increase efficiency to maximum.

5. Through 16 years internal marketing and 5 years foreign sales, we get good feedbacks especially like long using life and good price.

6. Take part in Shanghai, Guangzhou, Vietnam, Malaysia, Russia, India Trade shows.