iso9014=din931 M8 M30 Black painted hex head bolts

Product Overview

Description

Hex bolts are fasteners consisting of a head and a screw. The bolts are divided into iron bolts and stainless steel bolts. The iron is graded by 4.8 bolts and 8.8 bolts. Stainless steel bolts are made of stainless steel SUS201 bolts, SUS304 bolts, and SUS316 bolts.

 

Hexagon bolt refers to the fastener composed of the head and the screw. The bolt is divided into iron bolt and stainless steel bolt according to the material, that is, hexagonal bolt (partial thread)-C grade and hexagon bolt (full thread)-C grade, aka Hex head bolts (rough) with hex head bolts and black iron screws. Hexagon bolt: A type of fastener consisting of a head and a screw (a cylinder with an external thread) that is to be fitted with a nut for fastening two parts with through holes. This type of connection is called a bolted connection. If the nut is unscrewed from the bolt, the two parts can be separated, so the bolt connection is a detachable connection.

 

1. According to the way of connection, there are common and reamed holes. The bolts for reaming holes should match the size of the holes and be used when subjected to lateral forces.

2, according to the shape of the head, there are hexagonal heads, round heads, square heads, countersunk heads, etc. The general countersunk head is used in places where the surface is required to be smooth and not protruding, because the countersunk head can be screwed into the part. The head can also be screwed into the part. The tightening force of the square head can be larger, but the size is large. Hex heads are the most commonly used. In addition, in order to meet the needs of locking after installation, there are holes in the head and holes in the rods, which can not loosen the bolt when it is vibrated. Some bolts with unthreaded rods are to be thin, called thin waist bolts.

 

These bolts are beneficial for the coupling of variable forces. There are special high-strength bolts on the steel structure. The head will be larger and the size will change. In addition, there are special uses: T-slot bolts, the most used on machine tool fixtures, special shape, cut off both sides of the head. The anchor bolts are used for fixing the machine and the ground. There are many shapes, U-bolts. , as mentioned above and so on. There is also a special stud for welding. One end has a thread and one end is not welded. It can be welded to the part and the other side can be directly screwed.

iso9014=din931 M8-M30 Black painted hex head bolts

1. High quality, competitive price, excellent service and prompt delivery

2. Different standards of your choice

3. All products have passed internation standard