Металлолом использованные направляющие сталь HMS 1/2 готов к экспорту по всему миру

Описание и отзывы

Характеристики

We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium 
iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth 
alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal 
products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc 
ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap, 
copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules, 
Rubber Scrap, Paper Scrap, etc.

Chemical Composition: 
C:0.06 - 0.082% 
Mn:0.75 - 1.05% 
SI:0.13 - 0.28% 
P: Max 0.035% 
S: Max 0.045% 
Ar: Max 0.15%

HMS 1 / 2 STEEL METAL SCRAP FOR SELL:

Iron Scrap HMS1 & 2 
C:0.06 - 0.082% 
Mn:0.75 - 1.05% 
SI:0.13 - 0.28% 
P: Max 0.035% 
S: Max 0.045% 
Ar: Max 0.15%

HMS 1 / 2 STEEL METAL SCRAP FOR SELL:

Iron Scrap HMS1 & 2 
C:0.06 - 0.082% 
Mn:0.75 - 1.05% 
SI:0.13 - 0.28% 
P: Max 0.035% 
S: Max 0.045% 
Ar: Max 0.15%

HMS Scrap /Heavy Melting Scrap (HMS1 / HMS2) /HMS1 HMS 1&2 Shredded HMS Bundle Steel Scrap

Backed by huge industry knowledge, we are presenting a supreme quality range of HMS Scrap (1 & 2) to our highly valued consumers. These range of HMS Scrap are highly acclaimed for its high durability, tensile strength and exhibits superior resistant to adverse conditions. We test each and every product before release by various industrial parameters by our quality analyst. Client purchase these at reasonable rate.

We have Used Rails | HMS 1:2

ISRI CODE R50-R65

Composition
C - 0.54-0.82%,
SI - 0.18-0.40%,
MN - 0.60-1.05%,
S - 0.04% maximum
P - 0.035% maximum
AS: - 0.01% Maximum of Mass Share
HMS is usually traded as a blend of 1 & 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40).

PRODUCT DESCRIPTION AND SPECIFICATION;
Seller guarantees to the Buyer that the Goods delivered under the present Contract shall correspond to the characteristics shown below: ISRI USA GOST 2787-75 Russia HMS 1&2 (80/20) IRSI 200-206Steel scrap Defined as HMS 1 & 2 in an 80/20 mix under IRSI c odes 200 through 206. No n- metal impurities total 1 % (one percent) or less - no radiation, arms, ammunition, bombs, shells, mines, cartridges, Sealed gas carbon steel is not included in this scrap -we sell that as a separate item.

HMS 1 - IRSI CODES;
HMS 1 - IRS I Code 2 00: Heavy melting steel. Wrought iron and/or steel scrap ¼ inch or steel scrap ¼ inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging. HMS 1 - IRS I Code 2 01: Heavy melting steel 3 feet x 18 inches. Wrought iron or steel scrap ¼ inch over in thickness individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging .HMS 1 - IRS I Code 202: Heavy melting steel 5 feet x 18 inches. Wrought iron or steel scrap1.4 inch and over in thickness individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging.

HMS 2 - IRSI CODES;
HMS 2 - IRS I Code 2 03: Heavy melting steel. Wrought iron or steel scrap, black and galvanized. 1/8 inch and over in thickness, charging box size to include material not suitable as No.1 heavy melting steel.
Prepared in a manner to ensure compact Charging. HMS 2 - IRS I Code 204: Same as IRS I 203 but ma x size 36x18 inches HMS 2 - IRS I Code 2 05: Same as IRS I 2 04 but free of sheet iron or thin -gauged Material. HMS 2 - IRS I Code 2 06: Same as IRS I 2 04, but ma x size 60 x 18 inches.