Полиаспартическая краска для пола быстрое отверждение время прогулки до 4 часов Полная работа за 12

Introducing our new polyaspartic floor paint that belongs to the next generation of epoxy and polyurethane flooring products.  This new polyurea based polyaspartic floor paint has the following advantages:

- Very fast curing times. Walk on times is usually 2-3 hours, and the floor can be turned over for full operation in 24 hours

- Non-yellowing. Our polyaspartic floor paint is based on aliphatic polyurea, which means that the coating will not yellow or chalk. This is a massive advantage over epoxy coatings. Due to the UV resistance, the product can be applied to outdoor areas such as bars, decks, terraces etc without showing any signs of weathering

- Tough and elastic surface. This tough polyaspartic paint enables the product to withstand heavy traffic and wear and tear. The elasticity absorbs impact and makes the product scratch resistant.

- Can be applied in low and high temperatures.  The product can be applied in freezing temperatures and in high temperatures (over 40 degrees celsius) with little impact on the final surface

Fields of applications

The fast curing times enable the floor to be applied in places that cannot afford to close for a long period

- Commercial kitchens (see picture above)

- Factories

- Fast moving logistics warehouses

- Supermarkets

- Auto repair shops

Because of its non-scratch and non yellowing nature the product can be applied in 

- homes

- offices

- commercial stores

- hospitals

The polyaspartic floor coating can be applied with a roller or a squeegee. At least two coats of the product are recommended. 

It is highly recommended to prime the floor with Rapidcure PR prior to coating. 

Click Here to Learn More about Our Company >>>

• Quality is of utmost importance for our company. The high quality of our products is the key factor when nurturing close relationships of trust and confidence with our customers.

• Ktisis company is certified with ISO 9001:2015 Quality control takes place throughout the production phase of our products as well as upon completion of production and before packaging begins.

• Samples of each production set are kept for a specified space of time in the company (time frame depends on the product in question). Finally before major projects are about to commence, we conduct a test application on a small pilot scale so that we can make a precise assessment of the final result.

• We provide certificates of conformity for our products (CE marking) and several of our products are submitted to 3rd party laboratories for independent testing of EU standards.