Сохранить в закладки 10000009962713:
Type | 2K Primer Surfacer | |||
Substrates | Dried and sanded existing finishes, steel, aluminium, stainless steel, galvanized steel, glass fiber reinforce plastic. | |||
Surface Cleaning | Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry; again with degreaser | |||
Mixing Ratio | Epoxy Primer(4) | Hardener(1) | Thinner(1-2) | |
<30°C | 605 Epoxy Primer | 105 Epoxy Hardener | 63 Epoxy Thinner | |
Spray Viscosity | 16-19s to drop off, in 4# viscosity cup at 25°C | |||
Pot-Life | At 20°C, 3 hours mixed with hardener, thinner | |||
Re-treatment | Sanded with P600 or P800 sand paper, do following construction after drying | |||
Spray Gun Set Up | Gravity Feed: 1.2-1.5mm 4-5kg/cm² Gravity Feed: 1.4-1.6mm 4-5kg/cm² | |||
Spray Technology | Coats & Thickness: 2-3 coats, total 35-50um Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film. |
Drying Time | A. Allow 10-20 minutes air-drying, then 70°C baking 30 minutes, can sand after cool down. B. Air-Drying time 5 hours, at 20°C. | ||||
OEM ODM | As customers' order | ||||
Shelf Life | 2 years in original sealed can, cool and dry place at 25°C | ||||
Package Size | 1L*12 Tins or 3.75L*4 Tins |
Новинки товаров от производителей по оптовым ценам