1. A single nozzle can not be made out of ink?
Replacing the nozzle, replacing the sprinkler data line or the nozzle switch board, inserting the data line of the nozzle,
repairing the ink supply system, and replacing the main plate.
2. All the spray heads are not out of ink?
Repair the power, replace the head card, replace the main board. Reinstall or replace the decoder, reinsert or replace the fiber
line.
3. Broken line?
Improve the temperature of the environment, adjust the voltage of the nozzle, clean the nozzle with the cleaning liquid and
replace the ink.
4. Unable to discharge material?
Replacement of photoelectric switch, replacement of discharge motor or rewiring.
5. Middle wrinkle when printing?
Re feed, adjust the parallelism of the feed wheel and the feed wheel shaft, and adjust the pressure of the press wheel.
6. No moving head or software part function can't be used?
Replacement of main board, rewiring, reconnection or replacement of driver, replacement of motor or rewiring.
7. Stop printing?
Replace the decoder and grating, adjust the position of the decoder to the middle of the decoding bar, replace the motor, on
change the material to the small volume.
8. Inability to provide ink?
Replace the cartridge inductor, replace or reconnect, replace the main board, replace the ink pump, and replace the filter.
9. For ink supply?
Replacement of the main board and rewiring.
10. The print test bar and the diagram are not normal?
Change the grating or decoder, reconnect the fiber line, replace the driver, and replace the main board.