EKAPAH SUPERFLEX Гибкая текстильная мембрана 100 мм

Описание и отзывы

Характеристики

PRODUCT INFORMATION:

It is a three-layered, transverse, high-strength, longitudinally inflexible (rigid), extra-flexible thermoplastic elastomer-based waterproofing tape with a special non-woven felt coating on both sides. It is used for sealing and insulation of structural and cold joints

USAGE AREAS:

• Wet area (bathroom, balcony, terrace, roof, pool, industrial kitchen, etc.) waterproofing application,


• Horizontal and vertical joint and chamfer insulation,


• In the shower channel surrounds and drain unit insulation,


• In ceramic and natural stone applications,


• On balconies, parapets,


• On terraces, roof ends,


• It is used to compensate and insulate movements in cold joints and dynamic cracks in floors and curtains with its elastic structure.

Advantages:

• Easy to apply,.


• It is thin and does not create extra thickness on the applied surface.


• Thanks to its felt-covered surfaces and its elastic structure, it provides adhesion and workmanship advantage.


• It is resistant to temperature changes.

Method of Application:

IF USED AS A CHAMPER TAPE:

The surfaces to be applied must be clean, sound, dry and inclined. The preferred waterproofing material to be applied is applied on the joint and EKAPAH SUPERFLEX is placed on the joint so that it is embedded in the material. The felt parts are covered with waterproofing material by pressing with a brush. After the curing of the first layer is completed, the other layers are applied and insulation is provided.

IF USED AS A MEMBRANE:

The surfaces to be applied must be clean and purified. Membranes should be cut and prepared according to the surface to be coated. C2 tile adhesive should be applied on the leveling screed and laid on the membrane. Membranes should be applied on top of each other by overlapping 5-10 cm on the ground and 10-15 cm on vertical walls. Overlaps should be sealed with butyl tape, mastic or elastic cement in order of sealing. The wall, floor and corner joints should be centered with EKAPAH SUPERFLEX in the range of 10- 30 cm according to the area to be reused, and the insulation should be guaranteed. C2 tile adhesive should be applied again on the membrane and the top coating should be laid. The material to be used for sealing the overlaps should be chosen in accordance with the movement character of the structure.

METHOD OF APPLICATON:

A suitable waterproofing product is applied on both sides of the joint or crack (with the middle part remaining approximately 4 cm empty) and EKAPAH FLX tape is laid on it before it dries. The felt parts should be pressed with a roller or brush to ensure full contact with the waterproofing layer at every point. Care should be taken that no pots form on the tape surface. After the waterproofing product dries, a second layer should be applied on it and care should be taken to ensure that the felt part remains impermeable between the two layers. Care should be taken that the middle part of the tape does not stick to the insulation layer and remains idle, so that the tape will be able to bridge the movements of the structure. Cracks wider than 3 mm should be filled with suitable mastic before application.

TECHNICAL FEATURES:

Material Structure    Thermoplastic Elastomer (TPE) Based,

                                  Two surfaces covered with flexible non-woven felt.

Colour                      Blue (Can be produced in all desired colors.)

Total Width              It can be produced in all widths up to 700mm.

Thickness                 0,65mm +-0,1mm

Elongation at Break (Transverse) >%270

Pressure Water Resistance >1,5 BAR

Service Temperature -30C - +90C

Packing:

In rolls of 50 meters in polyethylene packaging

Shelf Life:

Store in a dry and cool environment away from sunlight for 24 months.

PRODUCT CODE:

• EKAPAH SUPERFLEX100: 100 MM


• EKAPAH SUPERFLEX120: 120 MM


• EKAPAH SUPERFLEX150: 150 MM


• EKAPAH SUPERFLEX200: 200 MM


• EKAPAH SUPERFLEX300: 300 MM


• EKAPAH SUPERFLEX400: 400 MM


• EKAPAH SUPERFLEX500: 500 MM


• EKAPAH SUPERFLEX600: 600 MM


• EKAPAH SUPERFLEX700: 700 MM