Модуль выпрямителя Eltek Flatpack S 24 В/1000 Вт SIL3 OVP (Часть №: 241122 209)

Сохранить в закладки 11000003429324:


Цена:599,00 $*

Количество:

  • В избранное

Описание и отзывы

Характеристики







Flatpack S 24V/1000W SIL3 OVP
Flatpack S delivers high power density, wide temperature range and superb reliability in its small 210 mm deep housing. The Flatpack S 24V/1000W SIL3 OVP is targeted Safety and Automation Systems (SAS) in offshore and process industry requiring SIL rated overvoltage protection on DC output.
Compact high efficiency rectifiers for marine, offshore and process industry applications
Used in the 3U rack with Smartpack S controller, the Flatpack S rectifiers cover 2 to 8kW applications using a minimum of space, less than 18 liters, and low heat dissipation.





Key Features :
Small
Short
Power dense, 26 W/inch3
High efficiency
OR-ing protection on output
Hot pluggable
Voltage keying


Model
24/ 1000 SIL3 OVP
Part number
241122.290
INPUT DATA
Voltage (nominal)
230 V AC/ DC
Voltage (full power)
185 - 275 V AC/ DC
Voltage (full power, reduced power factor)
275 - 305 V AC/ DC
Voltage (reduced power, linear de-rating)
85 - 185 V AC/ DC
Frequency (nominal / range)
45 - 66 Hz / 0 Hz
Current (maximum)
5.9 A RMS
Power Factor
> 0.99 at 50% load or more
Protection
Fuse and Shutdown above 305 V AC / 300 V DC and below 85V AC/ DC
OUTPUT DATA
Voltage (default)
26.7 V DC
Voltage (adjustable range)
21.5 - 28 V DC
Power (maximum) @ nominal input
1000 W
Power @ 85 VAC
420 W
Current (maximum) @ nominal input
41.7 A (@V OUT < 24 VDC)
Current sharing (10 - 100% load)
±5% of maximum current from 10 to 100% load
Static Voltage regulation (10 - 100% load)
±0.5%
Dynamic Voltage regulation
±5.0% for 10-90% or 90-10% load variation, regulation time < 50ms
Hold up time
>20ms; output voltage > 41 V DC
Ripple
< 200 mV peak to peak, 30 MHz bandwidth
Protection
Blocking OR-ing Diode, Short circuit proof and High temperature protection
Overvoltage protection, SIL3 parameters
• Protection level: 30V • PFD = TBS
• Proof test interval: 15 years • SFF = TBS
• Handles dual component failure
OTHER SPECIFICATIONS
Efficiency @ nominal input
92.50 %
Isolation
3.0 kVAC - input to output, 1.5 kV AC - input to earth & 0.5 kV DC - output to earth
Alarms: Red LED
Low mains shutdown, High and low temperature shutdown, Rectifier Failure, Overvoltage
shutdown on output, Fan failure, Low voltage alarm, CAN bus failure
Warnings: Yellow LED
Rectifier in power derate mode, Remote battery current limit activated, Input voltage out of
range, flashing at overvoltage
Normal operation: Green LED
Potential alarm relay (normally open)
Opens on alarms, mains outage and >40% loaded (ensures redundancy in 1+1 system) when
not connected to a controller
Normal (module running): Green LED 'on'
Acoustic noise
< 46dBA at nominal input and full load
MTBF (Telcordia SR-332 Issue I method III (a))
>300 000 (@ Tambient : 25 °C)
Operating temperature
-40 to +85°C ( -40 to +185°F), humidity 5 - 95% RH non-condensing
Output power de-rates linear from 1000W @ 45°C (113°F) to 400W @ 85°C(185°F)
Storage temperature
-40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing
Dimensions[WxHxD] / Weight
72 x 41.5 x 210mm (2.83 x 1.63 x 8.27”) / < 1 kg (2 lbs)
DESIGN STANDARDS
Electrical safety
UL 60950-1, EN 60950-1, IEC 61508
Marine
DNV-OS-D202, Ch.2 Sec.4 (DNV2.4): Temperature Cl.B, Humidity Cl.B, Vibration Cl.A, EMC Cl.B1) IEC 60945-4th edition
EMC
ETSI EN 300 386 V.1.4.1
EN 61000-6-1 / -2 / -3 / -4 / -5
FCC Part 15 Subpart 109
Environment
ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) & 2-3 (Class 3.2)
RoHS (2011/ 65/ EU) and WEEE (2002/96/ EC) compliant
1) Class B requires external filter on input (p/ n 241120.930)




Recommend Products






Company Profile




Packing & Delivery




1 Several kinds of delivery be provided to save most for clients

2 We respect clients to use their forwarders

3 All package based on international delivery. don't worry about the package. We will make sure it is strong enough.




FAQ




Q1.Do you have MOQ?
Depends on different ideas, Can be negotiated.The larger the quantity is, the competitive the unit price will be.
Q2.Should the customer pay the delivery fee,How much is it?
For the delivery fee,many samples are be requested to be sent,so we must get delivery fee.
If you tell me to use the appointed Express,you will give me your express account or you will pay according to the Express.
If you do not request,I will choose a cheap one in China.
Q3.How about the after sale service?
We will always keep the quality the same as the buyer's samples and if there is something with the quality,we will make compensation for our customers.
We will suggest our packing and take charge in our packing,we will keep the goods safe in the delivery.
We will trace the goods from the production to selling,we will solve the problems in the selling for our customers.
Q4.When can I get a price?
We usually quote within 24 hours after we get your inquiry.
Q5: Are you a trade company or manufacturer?
We are a trading company cooperated with several brands .
Q6 The materials are brand new or used one, Original ?
We sell brand new items and assured them original from manufacturer.


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам