Remarks
PTO: NH/4C
Fuel tank: ltr.
Air conditioning
ENGINE Iv eco Cursor 13 (F3BEE681C*B)
Turbocharger Variable Geometry Turbine
Cylinders in line 6
Bore (mm) 135
Stroke (mm) 150
Capacity (litres) 12,88
Max power (HP/kW) 440/324
@ rpm 1900
Max torque (Nm/Kgm) 2100/214
@ rpm 1000
Engine brake power 306 Kw @ 2400 rpm
Cooling system Water
Fuel system Unit pump injector
Speed limiter 90kmh
GEARBOXES ELECTRICS
Tension 24v negative earth return
Ratios Alternator 28v, 90A
1st 1st Starter 24v, 5.5kW
2nd 2nd Batteries 2 x 12v, 170Ah
3rd 3rd Circuits protected By fuse
4th 4th System Multiplex - CAN line data bus
5th 5th
6th 6th SUSPENSIONS
7th 7th Front Parabolic spring
8th 8th Rear Semielliptical suspension
9th 9th Anti roll bar Front and rear
10th 10th Shock absorbers 2 on front
11th 11th
12th 12th STEERING
13th 13th Type ZF 8098 Power assisted
14th 14th Steering wheel diameter 470 mm
15th 15th
16th 16th AXLES
Rev 1 Rev 1 Steering with single wheels Iveco 5985/2D. Rigid, hub reduction
Rev 2 Rev 2 Second axle Iveco 5985/2D. Rigid, hub reduction
Tandem 453291/2D. Rigid, hub reduction
PERFORMANCE
Type: 16S 2220 TO FUEL TANK
Axle ratios available 4,67 4,227 5,01 5,56 6,096 Type and capacity 300lt., steel, filter, fuel pump, prefilter.
Geared speed (km/h) 99 109 92 83 76
Gradeability % @ 40 t G.C.W. 80 69 91 100 100 CAB INTERIOR
Gradeability % @ 44 t G.C.W. 69 60 77 92 100 Active Day
Type: 16AS 2630 TO
Axle ratios available 5,01 4,227 4,67 5,56 6,096
Geared speed (km/h) 93 111 100 84 77
Gradeability % @ 40 t G.C.W. 95 71 83 100 100
Gradeability % @ 44 t G.C.W. 80 62 71 96 100
CLUTCH
Type Single dry plate, pull type.
Diameter 17 inches/430 mm
BRAKES
Type 2 independent pneumatic circuits
Service A.B.S. + E.B.L.
First axle Drum brakes. 410 mm
Friction area: 2884 cm2 CAB EXTERIOR
Second axle Drum brakes. 410 mm Active Day
Friction area: 2884 cm2
Tandem Drum brakes. 410 mm
Friction area: 3220 cm2
Parking Mechanical with spring cylinder, rear.
Emergency Combined with parking brake.
Air reservoirs 6 x 20 litres, steel
Air compressor 352cc – single cylinder CHASSIS
Heated air dryer Air Processing Unit
Trailer connections 15 pin plug
TRANSFER BOX Wheelbase Height (mm) x width (mm):
Type TC 2200 - gearbox independent. 4.750 - 5.020 289x80
Ratio On road: 1/1 – Off Road: 1/1,60.
Torque distribution Front 1 / Rear 2,2
4,57
Ladder construction. Pressed steel side members and riveted and bolted cross
members. (C section)
NOTE: The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time.
Forward control cab. Galvanised pressed steel construction, with SMC for
vulnerable parts. Helical spring suspension and dampers. Hydraulic cab tilt to 60
deg. Tinted electric door windows and tinted laminated screen. Manual rear-view
mirrors plus kerb and wideangle mirrors, according to 2003/97/EC. Blind rear cab
panel. Steel front bumper.
Interior incorporating, air suspended 3-way adjustable driver's seat, inertia reel belt.
Passenger seat 2 way adjustable with inertia reel belt. Soft feel dashboard with
multi-functional steering wheel incorporating touch button menu controls for the real
time digital dash display. Dual scale speedometer. All gauge functions monitored
using international symbols. Heater. Left and right hand entry assist handles.
Pneumatic adjustable steering column, 2 column mounted control stalks, left stalk
operating the indicators, main beam, windscreen wash wipe, (if provided) right stalk
operating Eurotronic 2 gear change, engine brake, cruise control and variable
speed limiter. If provided, on the left of the steering column there is the dash
mounted Eurotronic gearbox controls D - N - R mode (forward and reverse).
Overhead console for CB radio. Courtesy and map reading lights. Electronic PTO
switch and in cab preparation. Expansio Module. Fabric trim cab interior. Rear bulk
head storage with writing pad.