Сохранить в закладки 136711798:
Description
SWELLBAND is an active sodium bentonite/butyl rubber based waterstop designed to stop water infiltration through cast in place concrete construction joints by expanding upon contact with water to form a positive seal against the concrete. It also fills the cracks and pores on the concrete.
Fields of Application
Features and Benefits
Technical Data
Content Volume Change (DIN 53521)
Swelling Pressure Shore A Hardness (DIN 53505) Elongation at Break (DIN 53504) HS Code | Sodium bentonite/butyl rubber based >100% after 7 days in water >150% after 14 days in water >100% after 10 times dry/wet cycle (1 cycle : 7 days dry and 7 days water) >15 bar (after 7 days in water) 35 >250% 4008.21.90.00.00 |
Application Procedure
Preparation of Substrate
The surface must be clean and dry. It must not be applied to wet, frozen, greasy or dusty surfaces, and under wet weather conditions. SWELLBAND should be protected from humidity and rain before the application.
Application Method
Roll out required amount of SWELLBAND. Firmly press the entire length of it onto concrete. In vertical and overhead applications, press for at least 15 seconds for perfect adherence. Place seams side by side or end to end; do not overlap. Make sure waterstop covers all parts of the surface, especially for surfaces which are not perfect in shape. Remove silicon paper and pour concrete carefully and indirectly. It is not suitable for the joints of precast building elements.
Consumption
Depends on application areas.
Packaging
5 mm x 20 mm - 15 m/box
7 mm x 20 mm - 15 m/box
10 mm x 20 mm - 10 m/box
15 mm x 20 mm - 5 m/box
20 mm x 25 mm - 5 m/box
Shelf Life
12 months in original, unopened package.
Storage
Store in dry area between +5°C and +35°C. Protect from heat, freezing and direct sunlight.
Cleanup Information
Clean tools and equipment with water immediately after use. Dried material can only be removed mechanically.
Новинки товаров от производителей по оптовым ценам