Оптовая продажа китайская фабрика открывающаяся дверь без прикосновения удобная открывалка для
1,95 $
Сохранить в закладки 1600067684592:
Model: | BS-CAN |
Motor power: | 220VAC/260W |
Power supply: | 220VAC 50HZ / 110VAC 60HZ |
Motor rotational speed | 1400 r/min |
Reduce ratio : | 30:1 |
Gate max weight: | 800kg |
1. This is an innovative sliding gate operator ,which low stand-by consumption is the best design for solar charging. |
2. One Touch Easy Programming,The control syetem learns the Open and Closing limit automatically. |
3. Electronic soft-start ,ensures the motor starts steadily and smoothly. |
4. Release key for power failure and locking the operator's cover. |
5. Intelligent terminals for photocell,alarm lamp ,external receiver,etc. |
6. Easy to install and maintain. |
7. Woking encironment temperture -10℃`+50℃. |
Trouble | Cause | Shooting |
Motor can not work | 1,No power supply 2,Break fuse 3,Surpass load | 1,Check power supply 2,Change fuse 3,Check if any barrier on the track |
Can open but can not close | 1,Photocell is not connected properly 2,Photocell beam is block off 3,Photocell is broken | 1,Connect the photocell 2,Clear out obstacle 3,Change a new device |
Can open (close) but can not close (open) | 1,Position of limit switch is not correct 2,Limit switch is damaged | 1,Adjust position 2,Change limit switch |
Can not locate accurately | 1,Distance of limit switch is too large 2,Limit switch is wrong 3,Magnetic-stell’s position is wrong | 1,Adjust position of limit switch 2,Change limit switch 3,Re-adjust the position |
Release device is doesn’t work | 1,Operating handle is broken 2,Worm gears are jammed | 1,Change the handle 2,Rotate the pinion |
Push the “OPEN” button but the gate close | Push the “OPEN” button but the gate close | Connect correctly according to wiring diagram |
Motor can turn but can not work | 1,Compression spring of clutch is dead 2,Gear box is released | 1,Change the spring 2,Couple the worm gear |
Новинки товаров от производителей по оптовым ценам