Jiabaida 8s 24v bms lifepo4 батарея система управления 80a зарядное напряжение RS485 баланс Модуль

Сохранить в закладки 1600086058200:


Цена:44,50 $ - 47,90 $*

Количество:

  • В избранное

Описание и отзывы

Характеристики



Product Description


JBD-SP10S009

JBD-SP10S009 is designed by Dongguan jiabaida Electronic Technology Co., Ltd. It is an intelligent protection board scheme specially designed for 6-10 series battery pack of power assisted electric vehicle, AGV and other products. It is suitable for lithium batteries with different chemical properties, such as lithium ion, lithium polymer, lithium iron phosphate, etc. The protection board has strong load carrying capacity and the maximum continuous discharge current can reach 100A.
● 10 cell series protection
● Various protection functions for charging and discharging
● Discharge over current, short circuit protection functional processes of hardware
● Over voltage, under voltage, temperature and overload protection function processing of software
● Accurate SOC calculation with automatic SOC learning function
● Reserved RS232, UART communication
● UART communication function, can read all data of battery in real time and upgrade online
● Hardware discharge over-current, short-circuit protection function processing








Operating voltage range
20-30V
Operating current (MAX)
80A
Over-charge protection voltage
3.65±0.05V
Over-discharge protection voltage
2.5±0.1V
Balanced turn-on voltage
3.4±0.05V
Charging over current protection value
90A
High temperature protection value of charging
65±2℃
High temperature protection value of discharge
75±2℃
Internal resistance
<10mΩ






















matters need attention.
Please note:When assembling the wiring, weld the cable and the cell correctly, connect the B- of the PCM with the total negative pole of the cell, and then insert the cable into the needle base on the PCM. (Note: different connection modes for different strings, and different connection modes for the same port)








FAQ


1. What type of charger should I choose?

Lithium battery must choose specific charger, do not use Charger for Leadacid battery, for leadacid charger may have MOS with high pressure breakdown protection, which will not protect of BMS over charge. Life Po4 battery charger voltage=battery string No.X3.6V, while Li-ion battery charger voltage=Battery string No.X4.2V.

2.The relationship between Battery capacity and BMS current?

There is no direct relationship between Battery capacity and BMS current, big capacity doesn`t mean a big battery, but rely on continue current, that is to say if your engine is powerful, your should choose high current of BMS, it is not relied on batterycapacity.

3.Whether my BMS damaged?

If you want to judge if the BMS is damaged, please take the folowing steps, to test if each cell voltage is the same with
voltmeter? if the cell voltage difference is over 1.0V, the fault is displayed that it cannot run far, no power supply at the
start range, short charge time, all these issues are almost caused by battery cells, if BMS damaged is displyed as no charge, no discharge, no discharge while the battery has voltage.


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам