Лабораторный тестер безопасности аккумуляторная Взрывозащищенная испытательная машина для новых транспортных средств

Сохранить в закладки 1600275284699:


Цена:*

Количество:

  • В избранное

Описание и отзывы

Характеристики





Application
This testing machine is mainly used for over-charge and over-discharge of the battery. During the charge and discharge test, the battery is placed in an explosion-proof box, and the external charge and discharge tester is connected to protect the operator and the instrument. The test box of this machine can be tested according to the test requirements. Make customized.




Test Standard
GB/T 31485-2015 "Safety requirements and test methods for power batteries for electric vehicles"
GB31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"
UN38.3(2012) "Recommendations on the Transport of Dangerous Goods-Manual of Tests and Standards" Part III
IEC62133-2012 "Safety requirements for batteries and battery packs containing alkaline or non-acid electrolytes"


Product Paramenters


1. Inner box size
500x500x500mm (width x depth x height);
2. Dimensions
680x750x1475mm (width x depth x height, including door lock);
3. External material
cold-rolled steel plate with paint treatment, thickness 1.5mm;
4. Internal material
SUS#304 thickness 1.2mm;
5. Number of cabinets
2;
6. Box door
a single door opens to the left, and an explosion-proof chain is installed on the side of the box door;
7. Teflon tape is attached to the inside of the box, which is effective in insulation and flame retardant, easy to clean;
8. There are test holes on the left side of each layer of the box, which is convenient for the test connection line to pass
through;
9. Each test box has a lighting and smoke exhaust interface, and there is an interval design between each layer to avoid mutual influence on the test;
10. Control mode
metal button control ;
11. Pressure relief door size
200x200mm; Located at the back of the box, when the sample explodes, the pressure relief port will pop open to relieve the
pressure;
12. Smoke exhaust pipe
diameter φ100mm, located at the back of the box;
13. Observation window
Two-layer tempered glass with a size of 250x250mm, equipped with stainless steel mesh;
14. Equipment movement
There are four universal casters at the bottom of the equipment, which can move freely;
15. Lighting device
It is convenient to observe the state of the tested sample;
16. Power supply
1∮; AC220V; 50-60HZ








Solutions for Battery testing






Company Profile


We are a professional environmental reliability testing enterprise integrating R&D, manufacturing, sales and service. Since its establishment, it has gathered a group of experienced and skilled R&D personnel and an efficient and professional after-sales service team. With the spirit of innovation, focus, professionalism, and integrity, through the spirit of continuous improvement, we have created large-scale customized and complex experiments with design and manufacturing.




Our Advantages




Certifications




Customer Photos




Packaging






Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам