QIANGLI EM-2121 Emulsion is a non-ionic polydimethylsiloxane emulsion with an active content of 60%. Because of its non-ionic nature, it can be widely used in various systems, such as non-ionic, anionic, cationic emulsification systems or non-formed The polymer system of the composite, QIANGLI EM-2121 Emulsion has better stability than similar products on the market.
Features and advantages * Ready-to-use non-ionic emulsion * Has gloss and hydrophobicity * Good wetting and sliding properties * General-purpose release agent * Does not contain Alkylphenol polyoxyethylene ether (APEO) * Compliant with Cleaner Regulation (EC) No. 648/2004 * Good emulsion stability below 50°C * Good dilution stability, can be diluted to 1% * Good freeze-thaw stability
application filed
Application
* QIANGLI EM-2121 Emulsion can be used as a polishing agent component for automotive and furniture polishing In the agent, only a minimum amount of coating is required to provide good gloss * Release agent for the following products: Rubber or plastic parts (bottle stoppers, screw caps, barrel stoppers, etc.) * Used for lubrication of the following products: Extruded rubber parts; conveyor belt * Textile Spinning Sewing thread lubrication Knitwear manufacturing Sewing needle lubrication Glass cloth exhaust filter device
Typical physical properties
Description
QIANGLI EM-2121 Emulsion is a non-ionic polydimethylene with an active content of 60%Silicone emulsion, because of its non-ionic nature, it can be widely used in various systems, such as non-ionic Proton, anion, cationic emulsification system or polymer system that does not form a complex. QIANGLI EM-2121 Emulsion has better stability than similar products on the market
Details Images
Instructions
When used as a release/lubricant, QIANGLI EM-2121 Emulsion can be directly or diluted. Use, traditional spraying, dipping, rubbingor brushing. Low hardness water should be used release.
For example, 1 part by mass of QIANGLI EM-2121 Emulsion uses 10 parts by mass of water.
Dilution, the user can do a small test verification according to the concentration required by the use method before production. QIANGLI EM-2121 Emulsion can be used directly or diluted.
As a textile finishing .The padding process can be used when the agent is used.
The amount of emulsion depends on the fabric structure and type (day Natural or synthetic). In general, the recommended concentration is 5-50 g/L.
Padding process
1. Use a non-ionic detergent to rinse the fabric thoroughly, and then use 2 g/L 80% acetic acid to dissolve Rinse for 5 minutes. This process can neutralize the residual alkali in the previous process and avoid the instability of the dipping liquid.Certainly cause oil spots or sticky rollers. 2. If grease-resistant resin or filler is used in the process, it should be diluted according to the manufacturer’s recommendations. If the temperature is too high, the temperature should be lowered to 30℃ before padding the silicone emulsion. the following. 3. Pre-dilute QIANGLI EM-2121 Emulsion with approximately the same quality of water, Then add it to the mixing tank as needed. 4. If you need to use grease-resistant catalyst, please use the same quality of water to pre-mix Then add it to the mixing tank. 5. Dilute with cold water to the required volume.
Note when using/Operation considerations/Storage and validity
* Use clean mixing tanks, conveying lines, roll boxes and rollers * Use cold water to dilute the lotion * Do not use high shear agitators when preparing finishing solutions
This document does not contain product safety information required for safe use. Before use, please read. Product and its safety
data sheet and container label, to understand the safe use and hazard of related products. Information harmful to the body and health.
QIANGLI EM-2121 Emulsion can be frozen, so please avoid it. .Knot, please melt at room temperature before continuing to use, in
order to prevent freezing, please keep it above 5℃Stored in an unopened container below 25°C (77°F), this product is guaranteed from the date of production .The shelf life is 18 months.
Product packaging
300g sample package length,width and height 5.5*5.5*16cm 50kg package length, width and height: 36*36*58cm 200kg package length, width and height: 60*60*90cm Length, width and height of 1000kg: 120*100*115cm sample weight:330g Gross weight: 52kg 200kg Gross weight: 220kg Gross weight: 1060kg Conventional packaging: 300g transparent bottle ,50kg plastic drum, 200kg steel drum, 1000kg square ton drum