Описание и отзывы
Характеристики
led strip light 220v neon rgb/warm white 3000k 2835 LEDs with 120leds per meter, 10W/M CE ROHS approved:
![(2).jpg]()
![1.JPG]()
Before you order it , please look at the description , thank you.
Tips: Led strip must be light up after unfolded completely , do not light up in a roll , otherwise it will melt and do not work, which may cause safety problem.
Kindly Note :
1) when you order "15m/20m/25m/50m/ 100m single color neon light " or "9m/10m/15m/20m/50m/100m RGB neon light" , we will ship them to you via DHL/UPS/Fedex or other fast shipping, if there are any duty and Vat , please pay them, thanks,
2) (Cold White/Warm white/red/green/blue/yellow/pink) led neon strip come with 1pc Power plug and some pieces of aluminum clips(1m led neon strip with 1pc clip). RGB led neon strip come with 1pc 20key RGB remote controller(no battery) and some pieces of aluminum clips(1m led neon strip with 1pc clip)
3) 1pc 20key IR RGB remote controller can control max 30m RGB neon strip , if you want to control more than 30m RGB neon strip, please buy 1500W RGB controller(10mm PCB connector) for it in our store.
Packaged Included:
According to the items you buy
Description :
Type: SMD2835 LED neon lights
Input voltage:110V 220 -240V
LED Chip Brand: Epistar
LED type: SMD2835
LED lamp beads quantity: 120leds/m SMD 2835
Waterproof rate: waterproof IP67
Size: W8mm x H16mm
Color: blue, red, Cold white, warm white, RGB, green, yellow, pink
Plug Type: EU Plug, US Plug
220V Neon Light: Cuttable Every 100CM (approximately 40 inches)(At Marked Intervals)
110V Neon Light: Cuttable Every 50CM (approximately 20 inches)(At Marked Intervals)
![2222.jpg]()
![3333.jpg]()
![4444.jpg]()
![5555.jpg]()
Application:
![09090988.jpg]()
![76879.JPG]()
![779889.JPG]()
![787989.JPG]()
![0978977.jpg]()
![5.jpg]()
![6.jpg]()
1. Power voltage (DC)should be same as voltage of strip usage and fix safety device .
2. Do not let power on when fixing strips to avoid any risk of strip electronics short circuit,turn on power only under condition of connect and fixing strips well and in right way.
3. Not allowed to use Iron clip to bind strips heavily to prevent it into strips body which leads to short circuit and strip burning.
4. Cut the strips at place where is mark of knife printed on pcb.
5. Only allow to connect strips in series with same voltage and length together not longer than its cascading.
6. Strong connection at cutting place without short circuit risk. When fixing outside,use liquid glass glue sticking connection place well or waterproof connector to guarantee water can not put inside.
7. Voltage driving strips can match dimmer to adjust lighting brightness or color temperature .