Высокотехнологичная умная Сушилка теплового насоса машина для сушки манго с циркуляцией горячего воздуха

Baixin Mango Drying Machine uses the reverse Carnot principle to absorb the heat around the air and transfer the heat to the materials in the drying chamber. This dryer is mainly composed of a heat pump and a drying chamber. The dryer will be controlled by a touch screen controller, the temperature can be adjusted, and it has the characteristics of low power consumption.

The compressor sucks low-temperature and low-pressure gas refrigerant from the evaporator and compresses the refrigerant into high-temperature and high-pressure gas through work, then enters the condenser and is condensed to release a large amount of heat. The released heat is absorbed by the hot air circulation to take out the moisture in the material. After the condensed liquid passes through the expansion valve, it absorbs the heat from the surrounding air in the evaporator and evaporates into a low-pressure gas refrigerant, then it is compressed again by the compressor. finally, a circulation is formed, drying the material continuously can be achieved.

If you want to have a deeper understanding of the principle of heat pump dryers, you can Google search.

1. 75% energy saving, airtight dehumidification, and cycle drying method are adopted to save operating costs.
2. Stable and simple operation. touch screen, using PLC control, different drying curves can be set, suitable for drying different materials.
3. Waste heat recovery technology adopts an air heat exchanger to dehumidify and recover waste heat at the same time.
4. Precise control of temperature and humidity. The heat pump dryer can control the temperature between 20-80°C.
5. Recycling of volatile components.

 The Parameter of Mango Drying Machine

1. The operation is safe and reliable, and the temperature is stable. There is no risk of open flame, short circuit, etc.

2. The heat pump has the lowest operating cost, significant energy-saving effect, no emissions, environmental protection.

3. One machine with multiple functions, which can be used for the drying and processing of different materials;

4. Simple operation, PLC controls temperature and humidity accurately to ensure the drying quality of materials.