API 16 а Камерон тип одиночный двойной ножницы Ram Blowout Предотвращение

Structural style:Shaffer style,Cameron style

Two kinds of locking systen could be chosen:the manual locking system and the automatic hydaulic locking system

Not only the pipe rams and blind rams but aslo the variable bore rams and shear rams are available without any structure change.It is easy and convenient on-site to open the bonners by hydraulic pressure.The outlets on the both sides of the body make the operation on site flexible.The pressurized self-sealing sealing mechanism is used between the body and bonnets,so it is not necessary to apply too much pretightening force to secure the reliability of sealing. It is very convenient to lift and transport the BOPs with the four lifting rods.The new sealing mechanism of ram shaft secures the sealing reliability under the high pressure.The ring grooves of flanges are all lined with the corrosion resistant alloy.Matched-manufacturing is not necessary for the bonnets and body,so the diserepancy could be eliminated by thestructure.And it is convenient for the maintenance in the future. According to the latest API Spec 16A standard. According to the latest API Spec Q1 , quality standard of IOS9001 and NACE-MR-01-75 ,H2st Trim.According to user requirements and the use of environmental can choose casting or forging.

Ram Blowout Preventer - Cameron Style

Ram Blowout Preventer (Cameron Style) is designed and manufactured according to API Spec 16A standard. It can be equipped with various rams. With the best quality front ram rubber, top ram rubber and flange sealing stacks, ram blowout preventer (Cameron style) can work during the extreme working condition including extremely high or low temperature and extreme chemical environment.

Structure Features

The pressure‐bearing components are forged, so it has better strength and impact toughness;

Floating sealing is applied to the cylinder cover and the open/close of the cover is realized by hydraulic power, so it is quick and convenient for changing rams;

The auxiliary oil cylinder affords a smaller volume with same function;

The standard configuration includes a manual locking device, which ensures the ram is closed tightly in case there is a hydraulic pressure loss;

Both the manual and hydraulic locking device and the auxiliary oil cylinder can be installed flexibly into different positions according to customers' requirements, and the installation positions can be changed easily.

Ram Blowout Preventer (Shaffer Style) is designed and manufactured according to API Spec 16A standard. It can be equipped with various rams from 2‐3/8"~13‐3/8", also Blind and Shear Ram.

Structure Features

Body and side door are made of alloy steel;

Use seal rings assembly to improve sealing of side door;

Use floating type ram. Front ram rubber is separated from top ram rubber, making it more reliable in sealing and easier to change;

Use buried oil way inside body. Loading hinge is separated from hydraulic hinge;

Compact hinge structure makes it easy to assemble and disassemble;

Use arc-shaped body chamber with four round corners as transition section to reduce stress peak value whenever bearing the pressure;

Ram cavity can be fitted with ram assembly of same type BOP made abroad;

Flange grooves are stainless steel lined.

1) How can I place order?

A: You can contact us by email about your order details, or place order on line.

2) How can I pay you?

A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are using.

3) What's the order procedure?

A: First we discuss order details, production details by email or TM. Then we issue you an PI for your confirmation. You will be requested to do pr -epaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.

4)How do you take care when your clients received defective products?

A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.

5)How do you check all the goods in the production line?

A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.

Casing Head

100% Response Rate

API 6A Gate Valve

100% Response Rate

Christmas Tree

100% Response Rate