Оптовая продажа пигмент татуировки аксессуар оригинальный трафарет принтера чернильный программное обеспечение для передачи чернил 4OZ чернила струйной печати

How to Use:

1. Purchase a NEW Epson Ecotank printer. Models vary.1-TANK low cost models are preferred: M205/M200/M105

2. Take the printer out of the box and keep the instruction manual. Put the original Epson ink aside. Dispense stencil printer ink into the tanks with gloves. DO NOT use Epson Inks for stencils. DO NOT power up the printer until you have filled the ink tanks.

3. Plug the printer into the power outlet, turn the printer on and follow Epson instructions for startup process.

4. Use Epson instructions to connect the printer to the WIFI or purchase a USB cable to connect your printer to a computer or a phone.

5. The image will print just as you send it to the printer. Use your photo editor to adjust the contrast, lightness, size, etc.

Product Effect

We recommend Pacon tracing paper for best results. You can experiment with other papers. Regular printing paper is stiff and absorbent resulting in a very light stencil transfer. Flip, invert or mirror the image before printing so image will be correct facing when applied to the skin. Use image editor to adjust contrast, brightness or filters for optimal stencil image. Photoshop and other editors work well. Use Stencil Transfer solutions/gels on the skin until absorbed and tacky. Apply the stencil on the skin and hold firmly in place for 60 seconds. To reposition the stencil, apply hand sanitizer or alcohol to remove the stencil and start again. It will bring air into the ink when dispensing. It will print better after 24 hours. Sometimes you need to clean the print head for better results. Use at least once a week to prevent the print ink from drying out. Abnormal shutdown will easily cause the ink to dry out.