Биметаллический Термостат ksd301 10 А 250 В

1, Our thermostats for water heaters enjoy high reputation in qualities, and can be equal to Italian products, for which point most of other China’s suppliers cannot reach.

2, Normally the Sheath length is 275mm or 210mm, specific length is acceptable to be made as per your requirements.

3, Special discount will be offered to you once you order the related heating elements from us.

1, Our thermostats for water heaters enjoy high reputation in qualities, and can be equal to Italian products, for which point most of other China’s suppliers cannot reach.

2, Normally the Sheath length is 275mm or 210mm, specific length is acceptable to be made as per your requirements.

3, Special discount will be offered to you once you order the related heating elements from us.

4, When you order, please specify:

(1) Length

(2)  Voltage and Currency

(3)  Single or double safety

(4)  Drawing or Sample required for special configuration

Installation and Direction for Use:

• Method of earth: By means of the metal cup of thermostat connected in the earthing metal part.


• The thermostat should work in environment with humidity not higher than 90%, free of caustic, flammable gas and conducting dust.


• When the thermostat is used to sense the temperature of solid items, its cover should be clung to the heating part of such items. Meanwhile, heat-conducting silicon grease, or other heat media of similar nature, should be applied to the cover’s surface.


• If the thermostat is used to sense the temperature of liquids or steam, it is strongly recommended to adopt a version with stainless-steeled cup. Moreover, cautious measures should be taken to prevent liquids getting into/onto the thermostat’s insulation parts.


• The top of the cup must not be pressed to sink, so as to avoid adverse effect on the thermostat’s temperature sensitivity or its other functions.


• Liquids must be kept out of the thermostat’s inner part! The base must avid any force that could lead to crack; it should be kept clear and away from the pollution of electric substance to prevent insulation weakening that leads to short-circuited damages.


• The terminals should be bent, or else, the reliability of electric connection will be influenced.

Covers and terminals: