Мониторинг концентрации озона в режиме реального времени с помощью машины для производства 10 г имеет стабильную

Описание и отзывы

Характеристики

Dear users:

Thank you very much for choosing our series of products!

In order to use this equipment correctly, please read the instructions carefully before use. If you have any questions during use, please contact the sales or company in time, and we will be waiting for you at any time.

Usage

(1)Place the ozone generator in a stable, dry, ventilated and well-dissipated position.

2Connect the oxygen generating equipment or the oxygen cylinder, insert the oxygen conduit into the oxygen source input port, and adjust as required."Flow adjustment knob"Adjust the ozone flow rate (the inlet pressure of the oxygen source must not exceed0.1MpaOxygen flow0.5L-1L/min).

(3)Access220V50HZAC, pressON/OFFKey, the device enters the power-on inspection,. Inspection time is affected by ambient temperature, inspection time120It is normal within seconds, and the equipment starts to operate after inspection.

4For continuous use of ozone, insert the ozone conduit03Output port. PressO3Switch, sustainable output of ozone. Please close it after use.O3Switch to avoid ozone overflow.

5If you need to collect a small amount of ozone or use a syringe to collect ozone, insert the syringe or catheter"Infiltration"Port, press"Infiltration"LEDWhen the light is on, it can be collected and used. Release after collection'Infiltration'Port, can automatically shut down ozone output.

This equipment produces high-concentration ozone. Please pay attention to ozone pollution and personnel protection when using it.

6The machine is equipped with an ozone destruction device. When ozone is not collected, it will automatically decompose the produced ozone. If ozone is not used for a long time, please turn off the main switch to avoid the decay of the service life of the ozone destruction device due to long-term operation.

7If you need to use negative pressure extraction, insert the catheter into the negative pressure port, and press"Negative pressure pump switch".()

8Ozone concentration,Ozone concentration.:

1After the automatic inspection is completed, the device will be displayed as shown in the figure.

2, long press the setting key to enter the option, press or select the option4, press to enter the option

3, access options4This page is displayed after: Options1is the upper limit of ozone, option2is the lower limit. The interval value is10For example, the upper limit value80, lower limit70, upper limit20, lower limit10. The maximum limit of this equipment is80, the minimum lower limit is10.

4,,,.20No operation in seconds, the system automatically exits to the initial option

5This device shows4,,.!

9,.

 Precautions

     ,.:,,,.

      ,,.

      ,.

      ,.

      ,,,.

,,,.

      When ozone is used, it is strictly forbidden for staff to work in a high-concentration ozone space environment, and staff are in excess

Ozone concentration,.

      ,.

Environmental requirements for using this product:

1..

Indoor220V/50HZAC power supply.380V/50HzAC power supply

Ambient temperature requirements:-10 ℃-33 ℃

Environmental humidity requirements:≤ 55%.

,.

,.

Free statement:

     (:,)(,),.

     :,.

     ,..

     ,.