Алмазная шлифовальная насадка 30 шт./компл. 2,35/3 мм, шлифовальная насадка, шлифовальная насадка, материал нефрита, резьба, полировка, очищенные инструменты
119,03 ₽ - 195,08 ₽
Сохранить в закладки 1600535279626:
F12 Black silicon carbide Grit
F12 black silicon carbide : in abrasives and refractory is produced at high temperature in an electric resistance type furnace with quarts sand and petroleum coke as its main raw marterials .Its hardness is between fused alumina and synthetic diamond. Mechanical intensity of it is higher than fused alumina .It is brittle and sharp has electrical and heat conductivity in some degree.The abrasives made of it are suitable for working on cast iron,non-ferrous metal,rock, leather,rubber,etc.It is also broadly used as refractory material and metallurgical additive.
F12 macrogrit particle size distribution | |||||||||||
Grit | 1 | 2 | 3 | 3 and 4 | 3, 4, and 5 | Q6max, % | |||||
W1, μm | Q1, % | W2, μm | Q2max, % | W3, μm | Q3min, % | W4, μm | Q3+Q4min, % | W5, μm | Q3+Q4+Q5min, % | ||
F12 | 2800 | 0 | 2000 | 20 | 1700 | 45 | 1400 | 70 | 1180 | * | 3 |
* - not regulated W1,W2,W3,W4,W5 - cell size of 1,2,3,4 and 5 sieve in light Q1,Q2,Q3 - rest of grinding material on sieves 1,2 and 3 Q3+Q4 - total rest of grinding material on sieves 3 and 4 Q3+Q4+Q5 - total rest of grinding material on sieves 3, 4 and 5 Q6 - rest of grinding material on pallet |
Black silicon carbide packing
Новинки товаров от производителей по оптовым ценам