Гидравлический съемник для строительства фундамента гидравлический вытягивания труб в горных районах
1 818,00-1 828,00 $
Сохранить в закладки 1600568706978:
Model | GQ40 | |
Cut the steel bar diameter | 6-40 (Tensile strength of reinforcement uh ≤ 450MPa) | |
Maximum specification of cut flat steel | 70×15 | |
Max specification of cut square steel | (Q235-A)32×32 | |
Maximum cut angle steel | 50×50mm² | |
Nominal stroke of cutter | 34mm | |
Continuous cutting times | 32Times/min | |
Motor model | Y90L-2 Power:2.2 | |
Voltage | 380v | |
Rotating speed | 2880r/min | |
Dimensions | 1190×450×680mm | |
Overall quality | 485kg | |
Recommended number of bars to be cut at the same time with a diameter of 20mm | ||
Reinforcement diameter (mm) | Number of pieces cut each time | |
6~8 | 6 | |
9~13 | 5 | |
14~18 | 5 | |
19~20 | 2 | |
20以上 | 1 | |
Note: when cutting low alloy threaded reinforcement, the maximum diameter shall not be greater than Φ thirty-two Φ 36mm |
Новинки товаров от производителей по оптовым ценам