Горячий масляный насос для перекачки масла циркуляционный интеллектуальный высокого давления смазка обрабатывающий центр электромагнитный
8 771,88 ₽ - 16 447,26 ₽
Насос для кофемашины Циркуляция горячего масла Бесщеточный мини насос постоянного тока
- Категория: >>>
- Поставщик: Suzhou Macxi Fluid Technology Co. Ltd.
Сохранить в закладки 1600600958306:
Описание и отзывы
Характеристики
Products Description
Products Description
The built-in brushless DC motor is used to drive the gear pump.The drive of the product is integrated in the tail of the motor,so there is no need to connect the external driver.
Attentions:
1.400 Mesh filter shall be installed at the inlet of gear pump.
2.Before using, squeeze in a small amount of medium to lubricate the gear from the gear pump inlet.
Product Model
Pump Head | Motor | ||||||||
M | 0.07 | S | 57 | BL | 120W | ||||
"M"means by magnetic drive | Pump revolution,Unit:ml/rev,note 1 for details | Pump body materials,note 2 details | Pump head spec,Unit:mm,note 3 | Motor Type,Note 4 | Motor Power | ||||
Notes:
1. Pump output volume: 0.07,0.15,0.3,0.6,0.9,1.5,3.0,6.0,12.0 ,20.0,30.0,40.0,50.0(Unit:ml/rev)
2."S" means pump body material is 316L, gear and shaft sleeve are PEEK, seal with PTFE, the rest others are 316L.
"T" means pump body material is 316L, gear and shaft are Tungsten steel, shaft sleeve is PEEK, seal with PTFE, the rest others are
316L.
"P" means pump body material is PPS, gear materail and shaft sleeve are PEEK, seal with FFKM, the rest others are Hastelloy.
"H" means the pump body materials is Hastelloy, the gear and shaft sleeve is PEEK, the seal materials is PTFE, the rest of the
pump flow material is Hastelloy, the appearance and size is same as 316L pump, details product parameters refer to 316L pump head.
3. Pump head range: 57, 72, 88. Model 57 has 0.07,0.15,0.3,0.6,0.9,1.5 ml/rev;Model 72 has 1.5,3.0 ml/rev;Model 88 has
3.0,6.0,12.0 ml/rev;Model 145 has 20.0,30.0,40.0,50.0 ml/rev.
4.Motor:HS: Stepper Motor; BL: External drive DC brushless; BLa:Built-in drive DC brushless; BLb:Built-in drive DC brushless
(potentiometer)DC:Brush motor; Y:Common asynchronous motor; YB:Explosion proof asynchronous motor; SM:Servo motor YP: General
asynchronous frequency conversion YBP: Explosion proof asynchronous frequency conversion, SMP: Servo frequency conversion.
2."S" means pump body material is 316L, gear and shaft sleeve are PEEK, seal with PTFE, the rest others are 316L.
"T" means pump body material is 316L, gear and shaft are Tungsten steel, shaft sleeve is PEEK, seal with PTFE, the rest others are
316L.
"P" means pump body material is PPS, gear materail and shaft sleeve are PEEK, seal with FFKM, the rest others are Hastelloy.
"H" means the pump body materials is Hastelloy, the gear and shaft sleeve is PEEK, the seal materials is PTFE, the rest of the
pump flow material is Hastelloy, the appearance and size is same as 316L pump, details product parameters refer to 316L pump head.
3. Pump head range: 57, 72, 88. Model 57 has 0.07,0.15,0.3,0.6,0.9,1.5 ml/rev;Model 72 has 1.5,3.0 ml/rev;Model 88 has
3.0,6.0,12.0 ml/rev;Model 145 has 20.0,30.0,40.0,50.0 ml/rev.
4.Motor:HS: Stepper Motor; BL: External drive DC brushless; BLa:Built-in drive DC brushless; BLb:Built-in drive DC brushless
(potentiometer)DC:Brush motor; Y:Common asynchronous motor; YB:Explosion proof asynchronous motor; SM:Servo motor YP: General
asynchronous frequency conversion YBP: Explosion proof asynchronous frequency conversion, SMP: Servo frequency conversion.
Product Paramenters
product Model：M0.30S57BLa80W
Pump Model | Motor Type | L1 (mm) | L2 (mm) | The max pressure (bar) (test medium: water) | Weight(kg) | Rated Current(A) | Imp.&Exp. Size | Flow Range（L/H） |
M0.07S57 | BLa80W | 170.1 | 31.2 | 3.5 | 1.46 | 4 | G1/8 | 1.26~18.9 |
M0.15S57 | 172.4 | 33.5 | 8 | 1.46 | 2.7～40.5 | |||
M0.30S57 | 172.4 | 33.5 | 1.46 | 5.4～81 | ||||
M0.60S57 | 176.6 | 37.7 | 1.47 | 10.8～162 | ||||
M0.90S57 | 180.8 | 41.9 | 4 | 1.49 | 16.2～243 |
Pump Head Parameters | Motor Paramerers | Motor wiring definition | ||||||
Fluid Viscosity | 0.2~1500cps | Drive Type | Built in drive DC brushless | Red | +5V | |||
Ambient Temperature | -40℃-110℃(If the temperature of the conveying medium is over 70 °C, please make a special request.) | Rated voltage | 24V | BLack | 0 | |||
Static Sealing | PTFE | Speed regulating | 0-5 (0.35V ON 0.3V OFF) | Brown | Speed control signal 0-5V input | |||
Pump Body | 316L | Revolution | 500-4500rpm | Blue | 5V level, square wave, 2 pulses per revolution | |||
Gear | PEEK,316L | Working system | Continuous | |||||
The values in this table are for reference only.
Remarks:
OEM service are avaiable according to your request.
The specifications are only for reference, for details checking, please feel free to contact us.
OEM service are avaiable according to your request.
The specifications are only for reference, for details checking, please feel free to contact us.
1.Inner-hexagon screw*3
2.Front cover
3.Shaft sleeve*6
4.Pin*2
5.Pump body
6.Teflon gasket*2
7.Driving gear
8.Driven gear
9.Rear cover
10.O-ring
11.Platen
12.Internal magnetic steel
13.Countersunk head screw*3
14.Isolation cover
Product Advantages
No pulse, high precision.
the external gear design makes the pump flow relatively unaffected by the system pressure,and the flow output has no pulsation, which can accurately measure the flow, and has strong repeatability.
Stable transmission.
Gear transmission can ensure constant instantaneous transmission ratio.
Zero leakage.
no packing seal or mechanical seal, no wearing parts, using magnetic drive, static seal,truly achieve zero leakage
Corrosion resistance.
304 / 316L, Hastelloy and engineering plastics can be selected as pump body materials,which can be used in most chemical media.
Efficient and convenient, long service life
adopt the way of motor direct drive, reduce the vulnerable parts. High efficiency and energy saving, simple maintenance, low installation cost, long service life.
Applicability.
suitable for high differential pressure, high system pressure and wide range of medium viscosity.
long service life.
The magnetic drive design of the non dynamic seal makes the shaft end no longer need the dynamic seal, which ensures the leakage free operation of the pump. The solid and stable shaft support can ensure the accurate meshing of the gear when the pump is running at high speed, ensure the smooth operation of the pump, the high accuracy of metering and the long service life of the pump.
Diversified drive mode.
magnetic drive gear metering pump can be directly connected with DC brushless motor,2-pole and 4-pole AC motor without reducer. The flow control of the pump can be realized by the controller of AC, DC, brushless DC and other motors. We can provide a variety of standard driving methods to meet the needs of customers.
A wide range of applications.
magnetic drive gear pump in the design, manufacture and application of a large number of use of magnetic drive, pump and motor technology. It has the advantages of no pulsation, long life and no leakage. These advantages make our products widely used in chemical, medical, laboratory, water treatment, food and other industries.
Applicable conditions.
All kinds of liquids, high precision fluid transportation, high repeatability, continuous small flow without pulsation
It is used in aviation equipment, aircraft, spacecraft, chemical laboratory, chemical reagent adding, film manufacturing, pharmaceutical machine equipment, various lasers, micro cooling device of sighting instrument,tobacco flavoring adding, inkjet printing machine manufacturing, inkjet printer manufacturing, high-performance color printing machine and other industries
Industrial machinery and equipment | Water treatment | Food and cosmetics |
Inkjet printing/painting | Mask making | Food and Beverage filling |
Oil transportation | Booster pressure | Filling of perfume cosmetics |
Sand mill/Grinding | Circulating cooling | Quantitative Transport |
Company Profile
Suzhou Macxi Fluid Technology Co., Ltd. was established in 2014. Since the establishment of the company, we adhere to the concept of innovation and forge ahead. Our company is mainly engaged in the development,production and sales of pumps. Main magnetic drive micro gear pump, with an annual output of 100000 gear pump production capacity.The company has been committed to the optimization of product structure, improvement of service life and customization according to customer requirements, so as to improve the competitiveness of products for supporting manufacturers. We are looking forward to providing more high-quality products and services for more domestic and foreign users.
Certifications
FAQ
1. Q: Are you a manufacturer or trading company?
A : We are a manufacturer specializing in the development, production and sales of pumps. Our product has passed the test.
2. Q:What's your products MOQ?
A: Different model has different MOQ, pleasecheck with our salesman.
3. Q: How can I get some samples?
A: Usually we can’t offer free sample, pleasepay the sample and express fee.
4 .Q: What's your delivery time?
A: 1.The samples can be sent out within 5-7 days.
2.The batch order can be shipped out within 7-15 days after get your payment.
5 .Q:What's your warranty & after sale service policy?
A: 12 Months for all products starts from delivery date.
6. Q: How many qty so I can get your OEM service with myself brand name?
A: Different Models have different MOQ requirement, please consult our salesman.
7 .Q: What's the payment can you accept?
A:Usually we accept T/T , also RMB transfer in China.
A : We are a manufacturer specializing in the development, production and sales of pumps. Our product has passed the test.
2. Q:What's your products MOQ?
A: Different model has different MOQ, pleasecheck with our salesman.
3. Q: How can I get some samples?
A: Usually we can’t offer free sample, pleasepay the sample and express fee.
4 .Q: What's your delivery time?
A: 1.The samples can be sent out within 5-7 days.
2.The batch order can be shipped out within 7-15 days after get your payment.
5 .Q:What's your warranty & after sale service policy?
A: 12 Months for all products starts from delivery date.
6. Q: How many qty so I can get your OEM service with myself brand name?
A: Different Models have different MOQ requirement, please consult our salesman.
7 .Q: What's the payment can you accept?
A:Usually we accept T/T , also RMB transfer in China.
Похожие товары
555 с кронштейном вакуумный насос бытовой небольшой электрический воздушный медицинское оборудование для фитнеса общее
385,97 ₽ - 550,44 ₽
Высокоэффективный насос для химических отходов GODO QBY3-50F кислоты переработки серной
Промышленный насос для химической промышленности эфирного масла высокой температуры циркулирующей серной кислоты
32 894,52 ₽ - 87 718,72 ₽
STARFLO химический устойчивый к серной кислоте жидкий центробежный насос Электрический магнитный привод водяной магнит для продажи
6 894,70 ₽ - 7 113,99 ₽
Центробежный насос для пищевой промышленности с двойным механическим уплотнением центробежный серной кислоты
3 837,70 ₽
Фторный Магнитный насос устойчивый к сильным кислотным и щелочным химическим насосам
54 604,91 ₽ - 57 894,36 ₽
Wilden Интеллектуальный P4 шламовый мембранный насос серной кислоты
Новые поступления
Новинки товаров от производителей по оптовым ценам
Светлая Золотая морская солнечная энергия ландшафтное украшение постмодерн минималистский стиль чистая ручная роспись маслом 24x3 1 дюйм/60x80
35-53 $
Европейские антикварные простой Последние двойной металлической кровати
Автоматизированная складская система автоматического хранения в Гуанчжоу Eyda с эффективными стеллажами и
10 000-35 000 $
Декоративный чехол для PS5 Сменный Чехол консоли пластины Playstation5 пылезащитный с защитой от царапин
7,50-7,70 $
Лучшее качество детские подгузники для сухих подгузников новорожденных размер 2 4 и большие доставка или
3 $
Выключатель для формованного корпуса Schneider NSX100N 50KA AC 3P3D 25A TMD новая модель C10N3TM025
Буф2-.. М .. Краны
Оптовая продажа высококачественный сублимированный клубничный порошок Заводская поставка
5,50-6,40 $