Зазорный наполнитель силиконовый зазорный тепловой

Сохранить в закладки 1600610093146:


Цена:1,25 $ - 1,30 $*

Количество:

  • В избранное

Описание и отзывы

Характеристики



Product Overview


3.5 W/m·kThermal conductivity filler thermal gap filler thermal gap filler silicone
VS-GF3501 is a two-component, heat-curing silicone thermal conductive gap filler. It has good insulation and voltage resistance properties and thermal stability. It is safe and reliable to use, and has good rework ability. VS-GF3501 is used in new energy battery packs, automotive electronic control units, 5G communication base stations, power devices and heat sinks or machine casings, it can effectively remove air and achieve a good filling effect.


Features
* Excellent surface wettability
* Well insulation material
* High thermal, low heat resistance
* Continuous operating temperature:-40℃~+200℃
* Good resilience and long-term reliability
* Comply with RoHS and REACH certification requirement
* Complete specifications, accept customized



PRODUCT SPECIFICATIONS


Item
Technical Data
Test Standard Method
Mixing Ratio
1:1
/
Color(after mix)
Blue
Visual
Curing Condition
100℃·30min
/
Thermal conductivity
3.5±0.2 W/m·k
ASTM D5470
Hardness
70±10 Shore OO
ASTM D2240
Density
3.1±0.2 g/ml
ASTM D792
Tensile Strength
>35 KPa
GB/T 528-2009
Elongation
>10 %
GB/T 528-2009
Dielectric Strength
>8 kV/mm
ASTM D149
Volume Resistivity
≥1.0×1014 Ω·cm
ASTM D257
Dielectric constant(1000Hz)
<8.0
ASTM D150



Dimensions


Size
Package
VS-GF3501(Samples)
50CC Two components/PC
VS-GF3501
400CC Two components/PC


Note:Special size and packing are available as request.

Instructions
* Clean the surface of the object to be bonded or coated to remove rust, dust, oil, etc.
* Unscrew the glue cap, install the static mixer, and use the manual/automatic glue gun to squeeze the glue on the surface of
the cleaned object
* After glue is completed, attach the second surface to it and apply a little pressure to fix it.

Precautions
* The use environment should be free of large debris or other pollutants to avoid affecting the adhesion of materials and
objects
* Before the material is completely cured, avoid other objects contacting the material, which will affect the appearance and performance of the material
* This product should not be in the mouth and eyes. If it accidentally enters the mouth and eyes, rinse with water in time or go to the hospital for medical treatment.

Storage conditions Shelf life
* The product should keep the lid tightly closed and store in the original packaging at room temperature and away from light
* The product shelf life is 9 months from the production date



Detail Show


Application Pictures







Certificate&Hornor






Abroad Exhibition


Las Vagas AAPEX
Moscow Expo
Hannover Messe




Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам