Поставка с завода Марка Jade чистые чипсы для домашних животных ПОЛИМЕРНЫЕ ГРАНУЛЫ IV 0 80 84 CZ302 CZ318 CZ328 бутылок пищевого класса

PET Resin is cream or pale-yellow crystal, with smooth and shiny surface. Resistance to creep deformation, fatigue resistance, abrasion resistance and dimensional stability are perfect. Small wear and tear but high hardness, its toughness is the largest in thermoplastic. The electrical insulation of PET is perfect and little be affected by temperature, however, poor corona resistance. PET is non-toxic, weather resistance, and anti-chemical stability is very good. PET is low water absorption, resistance to weak acids and organic solvents. Intolerance of hot water immersion and alkali.  

Product Specification:

 PET IV 0.80 +/- 0.02 - For Water Bottle / PET Sheet
PET IV 0.82 or 0.83 +/- 0.02 - For Edible Oil Bottle
PET IV 0.84 or 0.85 0r 0.86 +/- 0.02 - For CSD Bottles
PET IV 0.76 or 0.78 +/- 0.02 - For Hot Fill Bottle / Water Bottle

Application:
1. Various types of food, medicines, non-toxic sterile packaging materials; Textiles, precision instruments, electrical components, high-grade packaging materials; Tapes, videotapes, film, computer floppy disk, metal coating and the substrate such as photographic film; Electrical insulation materials, capacitor film, flexible printed circuit boards and membrane switch and other electronics and machinery. 

2. Package bottle: From the initial development of carbonated beverages to the present beer bottles, cooking oil bottles, condiment bottles, medicine bottles, cosmetic bottles.

3. Electric products: Manufacture of connectors, coil winding tube, integrated circuit case, capacitor, transformer enclosure, TV accessories, tuners, switches, timer cover, auto fuses, motor bracket, and relays. 

4. Auto Parts: Such as distribution panels cover, ignition coils, valves, exhaust parts, distributor cap, casing measuring instruments, small electric motor housings, etc., can also be a good use of PET coating, surface gloss and rigidity, making the car exterior parts. 

5. Machinery and equipment: Manufacture of gears, cams, pump housing, pulleys, motor frames and watch parts, can be used as the microwave oven baking, a variety of roof, outdoor billboards and models.

6. PET Plastic molding can be injection molding, extrusion, blow molding, coating, bonding, machining, electroplating, plating, vacuum metallization, printing.

Packing:

1050 KGS PER BIG BAG, PP BIG BAGS WITH PE FILM INNER LINER,
20 BAGS WITH 10 PALLETS INTO ONE 20'FCL,TOTAL 21 MTS NET WEIGHT INTO ONE 20'FCL