Fishing bait boats Common Problems -Trouble Shooting for D16 V16
Bait Boat Fails to boot
Check whether the hull and the remote control battery are connected correctly;
2. Check whether the power on the hull and the remote control switch are turned on;
3. Check if battery is out of power and charge the battery or replace the battery if battery is defected.
Send to our email on instruction book for replacement or leave us a message on our web in instruction book
Remote control distance is too short
1. Check whether the hull antenna is twisted in place;
2. If the indicator light on the remote control flashes, please replace the remote control battery;
3. Replace the antenna when it is bad.
Single propeller does not work
1. If the carp fishing bait boat is on land, it is normal that one of the propellers does not work while turned on, because the gyroscope in the product does not work on land and you must put it on the surface of the water for test.
The boat yaws(off navigation)
1. Check whether the propeller is entangled with weeds;
2. Put the boat on the ground, it must be flat, and then re-calibrate theremote control and the boat by long pressing the pairing key on left of ON button and turn on the remote control and boatrespectively.
Boat and remote controller can be turned on but you can not control the boat
Re-calibrate remote controller and the boat
Bait Boat auto controls itself not by person
1.Check if buttons of RC is stuck. 2.If no buttons stuck most likely the RC has water in, replace RC.
Hoppers can not be flipped
1.There is a sound when you press the button for flipping hoppers. In this case, the servo needs to
be replaced, "or the servo plug falls off,which is less likely to happen";
2. There is no sound when you press the button for
flipping hopper, in this case there is a problem with the remote control, please replace RC.
Can not calibrate boat on water 1. Re-calibrate the remote control on the flat ground; 2. If the problem cannot be solved after calibration, the main circuit board of the boat needs to be replaced.
RC display flashes Please replace battery of remote control
15 Motor not working 1.Please check if water goes into the main board and is burned.If so need to replace main board. 2.Check if weeds are stuck in motors.
3. Check if motors are bad(this is less likely to happen).