Китайская фабрика вращающаяся сушилка для ясеня с тремя цилиндрами

The three-cylinder dryer is a high-efficiency and energy-saving product improved on the basis of the single-cylinder tumble dryer in our factory according to market needs. After the application of many enterprises and many industries, good drying effect has been achieved. The three-cylinder dryer improves the internal structure of the single-cylinder tumble dryer, increases the pre-drying design of the wet material before entering the machine and extends the drying time of the wet material in the machine, and installs sealing, heat preservation and reasonable supporting measures. So compared with the original single-cylinder tumble dryer, the production capacity of the three-cylinder dryer is increased by 50-80%, and the evaporation strength per unit volume can reach 120-180kg/m3, and the standard coal consumption is only 6-8kg/t.

With advanced technology, reasonable operating parameters, simple and feasible operation, it can be used in slag, clay, coal, iron powder, slag powder and other mixed materials, also widely used in dry-mixed mortar, yellow sand, etc. of the construction industry, as well as chemical, casting, etc. industry.

In addition, fuel burners, combustion chambers or supporting elevators, belt conveyors, metering feeders, cyclones, pulse dust collectors and spray towers can be designed according to user needs.

The main body of the three-cylinder dryer drives the four transmission rollers at both ends through four reduction motors, so that the tire belt rotates around the center. When the wet material enters the feeding end of the dryer through the feeding device, and the wet material is quickly pushed to the spiral lifting plate through the spiral guide plate. With the rotation of the cylinder, the spiral lifting plate installed in the three cylinders makes the material continuously lifting, rolling, throwing, scattering, and moving towards the discharge end at the same time. Meanwhile, the hot air from the hot blast stove enters the inner cylinder, the middle cylinder, and the outer cylinder in sequence to conduct intense heat exchange with the material. After the material and hot air flow are zigzag reciprocating in the three layers of cylinders, the heat energy is fully utilized to achieve the drying effect and materials are discharged.

1. The cylinder is designed to be self-insulating, so that the thermal efficiency can reach over 70%.

2. The product structure is exquisite and the operation is stable.

3. The drying effect is good, and the coal consumption per ton of dry material is less than 8KG.

4. The fuel can be coal, oil and gas.

5. Compared with the single-cylinder dryer, it occupies about 50% less land, and the power consumption is reduced by 60%.

6. The required final moisture index can be easily adjusted according to user requirements.

7. The air outlet temperature is low, and the dust removal equipment can be used for a long time.

8. Supporting wheels are used for rotation to replace the large and small gears. Stable operation.

9. The discharge temperature is lower than 60 degrees.

Firstly ------ Your raw material information

I will provide you the most suitable product and proposal according to your raw material information. Such as I need to know your raw material; your production capacity; your final product's requirements.

Secondly ------ Guidance

If customers plan to visit my factory, I will pick customers up at the airport, and then accompany with customers to test shredders in my factory. We can comminucate the most suitable machines' Commercial Invoice in my factory, and do the cooperation.

Thirdly ------ After-sale service 1

My factory will prepare product after receiving the down payment. Normally, after 5-25days preparing time, my factory will finish the machines' preparing, and then test machines for you, and I will send the testing effect to customers. Then after customers are satisfied with the testing effect, then customers will plan to send the down payment to my factory, then we load machines for customers.

Finally ------ After-sale service 2

After customers receiving the machines, my factory will dispatch technicians to install machines for customers, and teach customers how to operate machines.

Our Company Philosophy

• Best Quality for Market


• Perfect Service for Clients


• Scientific Management for Benefits


• Good Credit for Development

Gongyi Derui Machinery Co., LTD entered the mechanical industry from the beginning of the 1980’s, earlier than most factories. With the company philosophy these years, our products are sold to many customers from home and abroad, popular in India, Russia, Kazakhstan, Africa, South America, Mid-East, Southeast Asia, and almost 30 countries and areas. And it is our honor to make a contribution of to the development of these countries.

Growth is only a process, and the brilliance is the new beginning. In order to respond positively to the good policy of The Belt and Road, we will, as always, provide higher and higher quality products and service, to win more and more acclamation and respect for Chinese national industry. Review ourselves with serious attitude, and win the trust with excellent quality. We sincerely hope to take win-win cooperation with entrepreneurs and companies all over the world, to develop the market together.