Operating Instructions
1、Transfer paper,through the laser printer, the smooth surface is the printing surface (the black pattern is designed and printed in the black mode). 2、(1):Apply glue on one corner of the transfer paper, and the metal film covers the pattern and is aligned,adhered and fixed;
(2):The temperature of the laminator machine is 170-190 degrees Celsius,thermoplastics, and the metal film is torn off to obtain a metallic color pattern.
3、(1):Positioning the transfer film paper, the glue film covers the pattern and align.
(2):The temperature of the laninator machine is 200-220 degrees Celsius,thermoplastics,and the surface base paper is torn off.
4、Pattern cutting.
5、 Wet the base paper with water and wait for 20-50 seconds to make the transfer film and the base paper fully slide.
6、Draw out the base paper, make the transfer film stick to the surface of the object,drain the moisture and bubbles in the film with a piece of hard paper, and wipe off the moisture.
7、Put it in the oven at 120-130 ℃ for 10-15 minutes, and take it out (pay attention to burns).
8、(1)After cooling, take a drop of water on the corner of the film without the pattern,and wipe off the water after 30 seconds
(2)Pull up the transfer film along the corner of the water drop position and tear off the surface transfer film.
9、Appreciate the beautiful metallic design gift.