Круглый стержень из нержавеющей стали марки aisi 317L 321 с гарантией
1 299,00 $ - 2 255,00 $
Заводской запас круглый стержень из нержавеющей стали диаметром 16 мм 18 20
- Категория: Stainless Steel Bars >>>
- Поставщик: Shandong Gangpu Metal Materials Co. Ltd.
Сохранить в закладки 1600768863933:
Описание и отзывы
Характеристики
Products Description
Product name | 201 304 310 316 321 Stainless Steel Round Bar 2mm, 3mm, 6mm Metal Rod |
Grade | 201,202,303, 303Cu,304,304L,316,316L,310S,316Ti,321,430,904L,etc. |
Standard | AISI,ASTM,DIN,JIS,BS,NB |
Certification | SGS,BV,IQI,TUV,ISO,etc. |
Origin | Tisco, baosteel, jiusteel ,etc. |
Specification | Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm Bar: φ4-50mm;Length 2000-5000mm Pipe: φ6-273mm;δ1-30mm;Length 1000-8000mm Sheet: δ 0.8-36mm;Width 650-2000mm;Length 800-4500mm |
Package | clients' requirement and Standard export sea-worthy packing |
Delivery time | 5-15 days subject to the clients' requirement and quantity |
201 Stainless Steel Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1（Mid Copper）: The carbon content is slightly higher than J4 and the copper
content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing
products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes
are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the
curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is
easy to burst. Poor extensibility.
J3（Low Copper）: Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with
a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black
titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90
degrees, but it will not continue.
J4（ High Copper）: It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the
products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom
products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the
addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food
industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good
corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its
corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different commercial and industrial applications including:Furnace combustion
chambers,Automotive trim and molding,Gutters and downspouts,Nitric acid plant equipment,Oil and Gas refinery equipment,Restaurant
equipment,Dishwasher linings,Element supports and fasteners.etc.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1（Mid Copper）: The carbon content is slightly higher than J4 and the copper
content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing
products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes
are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the
curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is
easy to burst. Poor extensibility.
J3（Low Copper）: Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with
a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black
titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90
degrees, but it will not continue.
J4（ High Copper）: It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the
products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom
products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the
addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food
industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good
corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its
corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different commercial and industrial applications including:Furnace combustion
chambers,Automotive trim and molding,Gutters and downspouts,Nitric acid plant equipment,Oil and Gas refinery equipment,Restaurant
equipment,Dishwasher linings,Element supports and fasteners.etc.
Company Information
Surface finish | Characteristics & Application |
NO.1 | Hot-rolled surface,annealed and pickled,can be used as cold-rolling material,industial tanks and chem i cal devices. |
NO.2D | Cold-rolled, an nealed and pick led with out skinpassing the dull prod ucts can be used as auto mo bile parts, build ing materrials and pipings. |
NO.2B | The surface brightness and flatness of NO.2B is better than NO.2D. Then through a special surfacetreament to improve its mechamical properties, N02B could nearly satisfy com pre hen sive uses. |
NO.3 | Polished with abra sive belt of grit #100#120,have bet ter bright ness with dis con tin u ous coarse stria, used as in ner and ex ter nal or na ments for building, elec tri cal ap pli anc es and kitchen uten sils etc. |
NO.4 | Polished with abrasive belt of grit #150#180, have better brightness with discontinuous coarse stria, but thinner than NO.3, are used as bathtud buildinginner and external ornaments electrical appliances, kitchen utensils and food processing equipment etc. |
HL | Polished with abrasive belt of grit #150-320 on the No.4 finish and has continuous streaks, mainly used as building ornaments, elevators, door of building, frontal plate etc. |
BA | Cold rolled, bright an nealed and skin passed, the prod uct has ex cel lent bright ness and good re flex iv i ty like mirror, used for lectrical appliances, mirror, kitch en apparatus, or na ment ma te ri als etc. |
Products Application
Domestic | cutlery, sinks, saucepans, washing machine drums, microwave oven liners, razor blades | |||||
Transport | exhaust systems, car trim/grilles, road tankers, ship containers, ships chemical tankers, refuse vehicles | |||||
Oil and Gas | platform accommodation, cable trays, subsea pipelines | |||||
Medical | Surgical instruments, surgical implants, MRI scanners | |||||
Food and Drink | Catering equipment, brewing, distilling, food processing | |||||
Water | Water and sewage treatment, water tubing, hot water tanks | |||||
Chemical/Pharmaceutical | pressure vessels, process piping | |||||
Architectural/Civil Engineering | cladding, handrails, door and window fittings, street furniture, structural sections | |||||
reinforcement bar,lighting columns, lintels, masonry supports | ||||||
Packaging & Transports
Packing Details | Export standard package,bundled or be required. The inner size of container is below: 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) | |||||
Delivery Details | 7-15 dyas,or according to the order quantity or upon negotiation | |||||
FAQ
Q: Why choose us?
A: Our company have been in steel business for more than ten years, we are internationally experienced,professional, and we can provide variety of steel products with high quality to our clients
Q: Can provide OEM/ODM service?
A:Yes. Please feel free to contact us for more details discuss.
Q: How is your Payment Term?
A:One is 30% deposit by TT before production and 70% balance against copy of B/L; the other is Irrevocable L/C 100% at sight.
Q: Can we visit your factory?
A:Warmly welcome. Once we have your schedule, we will arrange the professional sales team to follow up your case.
Q: Can you providesample?
A: Yes, for regular sizes sample is free but buyer need to pay freight cost.
Q: Can provide OEM/ODM service?
A:Yes. Please feel free to contact us for more details discuss.
Q: How is your Payment Term?
A:One is 30% deposit by TT before production and 70% balance against copy of B/L; the other is Irrevocable L/C 100% at sight.
Q: Can we visit your factory?
A:Warmly welcome. Once we have your schedule, we will arrange the professional sales team to follow up your case.
Q: Can you providesample?
A: Yes, for regular sizes sample is free but buyer need to pay freight cost.
Похожие товары
Плоский стержень из полированной нержавеющей стали Haoguang ASTM SUS 308 a479 410 201 304 310s 316
1 600,00 $ - 1 800,00 $
431 нержавеющий
3,10 $ - 3,40 $
Нержавеющая сталь нержавеющая ss 201 410 420 440c 316
1 865,57 $ - 2 470,62 $
Astm a276 410 нержавеющая сталь круглый стержень astm 420 tp420 из нержавеющей
1,80 $ - 2,30 $
Высококачественный круглый стержень из нержавеющей стали Astm Ss 310
1 980,00 $ - 2 000,00 $
CBDMART Высококачественный стержень из углеродистой стали металлический стальные круглые стержни для
10,00 $
Плоский стержень St S 440c из нержавеющей стали 40X2 мм яркий и полированный плоский квадратный 10-13000 производство
1 500,00 $ - 2 000,00 $
Новые поступления
Новинки товаров от производителей по оптовым ценам
Прямая Продажа с фабрики 65 см Модернизированный подвесный стерео голографический проектор светодиодный вентилятор высокой четкости экран 3D дисплей
155-185 $
Оригинальная популярная клавиатура для рабочего места Genos2 с 76 клавишами
200 $
Умный цифровой электронный ручной инфракрасный лазерный термометр для ветеринарного и медицинского мониторинга человека
5-10 $
Цифровой инфракрасный лазерный термометр для взрослых
5,90-6,70 $
Командная версия 24-скоростной ультралегкий карбоновый шоссейный велосипед Гоночная рама и комплект колес
Четырехцилиндровый двигатель CA6110/125G5 части клапана 1007011-A013-0000 1007016-A013-0000
0,50 $
55203781 46740344 55181201 55266538 зубчатый шкив коленчатого вала для FIAT 500 BRAVA BRAVO DOBLO PANDA PUNT0
3-3,70 $
