Эквалайзер батареи 8S для 96В аккумуляторной системы 2XHA02 balanceador de bateria Баланс напряжения
78,00 $
Docan Amy 48V 200A Apex 48200 умная батарея для домашнего хранения на солнечных батареях BMS с ЖК дисплеем RS485 Canbus и bluetooth
- Категория: >>>
- Поставщик: Docan Technology (shenzhen) Co. Ltd.Docan Ltd.
Сохранить в закладки 1600780491415:
Описание и отзывы
Характеристики
PRODUCT SPECIFICATIONS
Battery type and serial number | LFP(16S) | NCM(14S) | |||||||||||||||
Continuously charging/discharging current | 200A | ||||||||||||||||
Communication protocol | CANBUS(defult) RS485(Please contact Sale man) | ||||||||||||||||
Custom function | Heating function,External switch,RS485 protocol | ||||||||||||||||
Discharge Output Impedance | <2mΩ | ||||||||||||||||
Working Temperture | -20℃-70℃ | ||||||||||||||||
compensating impedance | 10mΩ | ||||||||||||||||
Pre-charging | 0-3000ms | ||||||||||||||||
Current limiting(charging) | 10A | ||||||||||||||||
Current Balance | Passive balance | 150mA(Max) | |||||||||||||||
Power consumption | Working mode power consumption | <40mA | |||||||||||||||
Sleeping mode power consumption | 0uA | ||||||||||||||||
Capacity protection | Nominal capacity | 5-500Ah | |||||||||||||||
Remaining capacity protection | 5% | ||||||||||||||||
Short Circuit protection | Short circuit protection lock | Continuously short in the output circuit | |||||||||||||||
Short circuit protection lock times | 5 times | ||||||||||||||||
Short circuit protection lock release | Connected with charger | ||||||||||||||||
Individual cell voltage protection | Over voltage protection | 3650mV | 4200mV | ||||||||||||||
Under voltage protection | 2700mV | 2900mV | |||||||||||||||
Voltage protection | Over voltage protection | 57.6V | 58V | ||||||||||||||
Under voltage protection | 41.6V | 40.6V | |||||||||||||||
Current protection | Over current protection | 160A-210A | |||||||||||||||
Over current protection | 30mS | ||||||||||||||||
Heating function | Start | 0℃ | |||||||||||||||
Stop | 10℃ | ||||||||||||||||
Advantages | Protection | Over voltage protection ；Capacity protection；Pre-chargeing function；Current limiting；Under voltage protection Charge, discharge and ambient temperature protection Charge and discharge over current protection Charge current limitation；Short circuit protection；Custom function:；Heating function；External switch；RS485 protocol | |||||||||||||||
Hot Selling Products Recommend
Important & Warmly Reminder
BMS Functions
Monitoring:
Voltage: total voltage, voltages of individual cells, minimum and maximum cell voltage.
Temperature: environment temperature, temperature of cells and BMS PCB.
State of charge: indicate the charge level of the battery.
Current: current in or out of the battery.
CANBUS 24/48V 8S/16S 200A lithium iron phosphate battery smart monitoring management system 1
Communication:
CANBUS communication
Our BMS can support up to 16 units in parallel operation.
RS485 communication(RS485 can be customize)
PS:When we want to view the battery pack parameters through the battery parameter monitoring software, we need to use the Rj45 to
USB Adapter to connect the battery pack to the computer. We recommend that you purchase an Rj45 to USB Adapter from us.Adapters
purchased from the market may not work properly due to the definition of the hardware
Equalizing function:Passive equalization
Communication methods:CANBUS communication method:
Now our CANBUS communication board supports these brands of inverters,and our BMS has built-in CANBUS protocol of matching inverter brand, which can be automatically matched or manually switched:The default is the Pylontech CANBUS protocol
Goodwe；Growatt(The default is SPF(off-grid) protocol. If your inverter is SPH(on-grid) , please contact the sales person)；Victron；LUXPOWER；Sofar；Deye；Sermatec；Renac；TBB POWER
Solis；SMA；Foxess；IMEON
PS:If the inverter brand not in the listed,please ask your inverter supplier for the protocol define.And sent it to us,we 'll help confirm that RS485 communication method
Batteries should be stored (more than 1 month) indoor with a dry and clean environment at 0 ℃~35 ℃.
Communication methods:CANBUS communication method:
Now our CANBUS communication board supports these brands of inverters,and our BMS has built-in CANBUS protocol of matching inverter brand, which can be automatically matched or manually switched:The default is the Pylontech CANBUS protocol
Goodwe；Growatt(The default is SPF(off-grid) protocol. If your inverter is SPH(on-grid) , please contact the sales person)；Victron；LUXPOWER；Sofar；Deye；Sermatec；Renac；TBB POWER
Solis；SMA；Foxess；IMEON
PS:If the inverter brand not in the listed,please ask your inverter supplier for the protocol define.And sent it to us,we 'll help confirm that RS485 communication method
Batteries should be stored (more than 1 month) indoor with a dry and clean environment at 0 ℃~35 ℃.
1. When the battery is charged and discharged, the conditions for monitoring and protecting the battery voltage, current and temperature shall be ensured.
2. Please keep the battery away from the heat source, fire source and other corrosive environments such as water,heating, strong acid and strong alkali.
3. Do not short circuit the battery or install it with incorrect polarity at any time，otherwise it can cause serious damage to the battery and cause danger.
4. Do not mix batteries of different models or manufacturers.
5. Do not use external force to make the battery fall, impact or puncture. Do not disassemble the battery or change the external structure.
6. When the battery is not used for a long time, please keep the battery in the state of 30%-50% SOC, and avoid the environment of strong direct sunlight or high temperature and humidity.
7. When operating the battery, it is necessary to wear rubber gloves and other protective devices.
8. In case of leakage, smoke or damage of battery, please stop using immediately.
9.DIY battery pack must be getting the cells balanced before assembly.
These situations not provide return nor refund
*After the assembly or assembly process happen any problem, such as the protection board connected to the wrong wire burned lead to battery damage, charger failure, the assembly error or unbalanced assembly, etc.
*After the assembly or assembly process happen any problem, such as the protection board connected to the wrong wire burned lead to battery damage, charger failure, the assembly error or unbalanced assembly, etc.
*For damage caused , such as battery bulge/welded, battery pack without protection BMS caused by charging.
Tip: These products are batteries only, without protection board,you need to purchase a match one! You can check our shop and search BMS.
Courier and logistics
In addition, because the battery is prohibited product, many courier and logistics are unable to send, the arrival will indeed be slower, so please wait patiently after place an order. Can Not give us bad feedback due to the courier company or because of the courier service slow or other factors. open dispute will be unacceptable. Sorry for any inconvenience.
Courier and logistics
In addition, because the battery is prohibited product, many courier and logistics are unable to send, the arrival will indeed be slower, so please wait patiently after place an order. Can Not give us bad feedback due to the courier company or because of the courier service slow or other factors. open dispute will be unacceptable. Sorry for any inconvenience.
How we guarantee TOP quaity for you?
Matched and tested the IR and voltage over 3 times before delivery;MAKE SURE YOU RECEIVED TOP QUALITY,BRAND NEW WITH FACTORY QR CODE.
Here is LF304 320AH battery test report as below
Just SENT INQUIRY to us if you need other model test report.
Just SENT INQUIRY to us if you need other model test report.
Accessories you will also need
Docan are Official distributor of Seplos/ Apexium/ JK / JBD brand and Supply other safety DIY Pack accessories together.
Just show us what kind BMS you need. Docan Amy will quote the RIGHT BMS and accessories together. 100% technical support PLUS 100% after-sales support
Welcome to contact DOCAN AMY (click here) to more details:
Just show us what kind BMS you need. Docan Amy will quote the RIGHT BMS and accessories together. 100% technical support PLUS 100% after-sales support
Welcome to contact DOCAN AMY (click here) to more details:
Customers feedbacks and reviews
Ready to ship stocks from EU and USA Stocks！
24H Shiping /48H tracking number update/ 7days delivery
24H Shiping /48H tracking number update/ 7days delivery
Welcome to contact DOCAN AMY (click here) to more details:
Packing & Shipping
MAKE SURE YOU RECEIVED TOP QUALITY,BRAND NEW WITH ORIGINAL QR CODE.
Each cell going to be test the battery Voltage ,Internal resistance over 3times before shipping.
* Use high hardness custom sponge to strengthen the battery* 5 layers of dangerous goods export corrugated carton
* Positive and negative paste insulation tape
* We will label test data on each cell before delivery
* If customer have requirement, we can provide Wooden Packing for shipping.
* AFTER THE ASSEMBLY OR ASSEMBLY PROCESS HAPPEN ANY PROBLEM, SUCH AS THE PROTECTION BOARD CONNECTED TO THE WRONG WIRE BURNED LEAD TO BATTERY DAMAGE, CHARGER FAILURE, THE ASSEMBLY
ERROR OR UNBALANCED ASSEMBLY, ETC.
*FOR DAMAGE CAUSED , SUCH AS BATTERY BULGE/WELDED, BATTERY PACK WITHOUT PROTECTION BMS CAUSED BY CHARGING.
* Positive and negative paste insulation tape
* We will label test data on each cell before delivery
* If customer have requirement, we can provide Wooden Packing for shipping.
Return & Refund Policy
DIY BATTERY PACK MUST GET THE CELLS BALANCED (SAME VOLTAGE ) BEFORE ASSEMBLY. LATER IF THERE HAPPENS DON'T KNOW HOW TO ASSEMBLED OR WRONG ASSEMBLY IS NOT ACCEPTED REFUND. PROFESSIONALS WILL DETECTED VOLTAGE/RESISTANCE/APPEARANCE AND OTHER ISSUES BEFORE EVERY SHIPMENT, WE CAN ONLY ENSURE THAT THE SINGLE BATTERY IS GOOD, WHEN ARRIVAL YOU CAN TEST THE CELLS WITHIN 15 DAYS, AFTER THAT MEANS BATTERIES HAVE NO PROBLEM, DOES NOT PROVIDE RETURN NOR REFUND. IF YOU FOUND PROBLEMS YOU CAN CONTACT US FOR RETURN OR REFUND.
BATTERY CAN ONLY BE UNUSED (THE ELECTRODE INTACT, NO WELDING, NO WEAR, THE APPEARANCE GOOD) TO PROVIDE RETURN. ANY RETURN BEHAVIOR BUYERS NEED TO BE RESPONSIBLE FOR SHIPPING FEE.
1).WARRANTY PERIOD:3 YEARS(FROM THE DATE OF SUCCESSFUL DELIVERY),IF THE SINGLE BATTERY CAPACITY LESS THAN 80% INITIAL CAPACITY,TAKE THE TEST PICTURES OR VIDEO TO US,WE WILL REPLACE IT OR GIVE SATISFIED SOLUTION.
2).IF ANY MISS OR DAMAGED FOR THE SHIPPING. PLEASE CONTACT US FIRSTLY, THEN SEND US THE PICTURE OR VIDEO TO CHECK. IN CASE OF LOSS OF CARGO OR THE BATTERY IS DAMAGED AND CAN NOT BE USED OR THERE IS A GREATER RISK OF USE, WE WILL COMMUNICATE WITH BUYER IF RESEND IT OR REPLACE IT OR REFUND THE PRODUCT COST.IF BUYER SEND
BACK THE CELLS TO SELLER,BUYER SHOULD PAY FOR THE SHIPPING COST.
3).THESE SITUATIONS NOT PROVIDE RETURN NOR REFUND
1).WARRANTY PERIOD:3 YEARS(FROM THE DATE OF SUCCESSFUL DELIVERY),IF THE SINGLE BATTERY CAPACITY LESS THAN 80% INITIAL CAPACITY,TAKE THE TEST PICTURES OR VIDEO TO US,WE WILL REPLACE IT OR GIVE SATISFIED SOLUTION.
2).IF ANY MISS OR DAMAGED FOR THE SHIPPING. PLEASE CONTACT US FIRSTLY, THEN SEND US THE PICTURE OR VIDEO TO CHECK. IN CASE OF LOSS OF CARGO OR THE BATTERY IS DAMAGED AND CAN NOT BE USED OR THERE IS A GREATER RISK OF USE, WE WILL COMMUNICATE WITH BUYER IF RESEND IT OR REPLACE IT OR REFUND THE PRODUCT COST.IF BUYER SEND
BACK THE CELLS TO SELLER,BUYER SHOULD PAY FOR THE SHIPPING COST.
3).THESE SITUATIONS NOT PROVIDE RETURN NOR REFUND
* AFTER THE ASSEMBLY OR ASSEMBLY PROCESS HAPPEN ANY PROBLEM, SUCH AS THE PROTECTION BOARD CONNECTED TO THE WRONG WIRE BURNED LEAD TO BATTERY DAMAGE, CHARGER FAILURE, THE ASSEMBLY
ERROR OR UNBALANCED ASSEMBLY, ETC.
*FOR DAMAGE CAUSED , SUCH AS BATTERY BULGE/WELDED, BATTERY PACK WITHOUT PROTECTION BMS CAUSED BY CHARGING.
About the shipping | ||||||||||
1 | USA | ETD:3-7 days | The tracking will be update after pick up by local express.Usually it will take around 15 days | By sea+FEDEX Delivery(DDP,Tax free) | ||||||
ETA:40days+ | ||||||||||
2 | EU | ETD:3-7days | The tracking will be update after pick up by local express.Usually it will take around 10 days after delivery. | By railway+UPS(DDP,Tax free) | ||||||
ETA:35 days+ | ||||||||||
3 | AU | ETD:3-7 days | The tracking will be update after pick up by local express.Usually it will take around 15 days after delivery. | By sea+Delivery(DAP) | ||||||
ETA: 40days+ | ||||||||||
4 | We can't deliver the following address directly | |||||||||
A | USA: Military address and PO box address are not acceptable; Puerto Rico, Virgin Islands, Guam, Alaska Note: Hawaii does not include customs duties and requires additional freight, Please contact us online. | |||||||||
B | Portugal: Azores and Madeira | |||||||||
C | Spain：Canary Islands, hueda and melilia | |||||||||
D | Russia: Kamchatka Peninsula | |||||||||
E | Other:Some remote areas not listed，Please provide shipping address and zip code to us to check. | |||||||||
FAQ
Q: Can the 485 version and CAN version of the V14 BMS change the baud rate of the BMS by refreshing the program？
A: NO, they are different version of the chip.
Q: Is it an equalizing function, active or passive and what is the equalizing current?
A:It’s a passive equalizing function with 150mA current.
Q: What is the connection mode of communication when BMS communicates with inverter or 485 communication and CAN communication?
A: External communication means that BMS is connected to CANBUS interface when communicating with inverter (RS485 interface is
used for communication with Voltonic inverter)
Q: The BMS cannot work and indicator does not light up.
A: May be caused by D4 diode damage.
Q: Which BMS model suitable for ternary lithium battery?
A:The ternary lithium battery can support up to 14S version of the BMS. The firmware version of the ternary lithium battery BMS is
different from the lithium iron phosphate BMS and cannot be used universally.
Q: SMA and Victron inverter will report fault when BMS is fully charged.
A: The fault can be solved by refreshing the firmware program (version 2.8). The V16 BMS does not have this fault.
Q: Voltronic inverter and its licensed inverter only have 485 communication version of BMS or new version of BMS (V16 version).
How to use the inverter?
A: The Voltonic inverter uses RS485 interface for communication. DIP dialing is different from other versions of BMS. Connect and
dial 1on to the host, 2on to the first slave, and 3on to the second slave. You can ask me to send relevant documents.
Q: How is BMS function of SOC calculating and cycle life counting work?
A: First, modify the rated capacity of the battery, then complete a full charge and discharge process,the actual battery capacity will be learned.SOC is calculated by capacity accumulation and voltage calibration.It has the function of calculating the number of charging and discharging cycles. When the cumulative discharge capacity of the battery pack reaches the set full capacity.At 20% (default), the number of cycles increases one,the set value of battery cycle
capacity parameter can be changed through the upper computer.
Q: The issue of battery monitoring software cannot see the master when multiple BMS are in parallel.
A:When multiple BMS are in parallel, the battery monitoring software cannot see the information of the master, only see the information of the slave. If you want to see the information of the master, you need to turn off the DIP of the master and connect it separately or use the LCD screen with Bluetooth function, or use the onboard BMS with Bluetooth function.
Q: Why not message display on LCD screen?
A: The function of LCD did not open.Poor contact of connecting or broken wire of LCD screen.The new version BMS with Bluetooth, but install with an LCD screen without Bluetooth.
Q:limited algorithm of charge current.
A:Unbalanced in current distributed.
1.no charge current if any device is in charging warning of voltage,temperature,and capacity or charging protection.
2.charge current values remain in 10.0A when no device in charging.
3.charge current is base the role if over current is greater than 20.0A then reduce 10.0A,otherwise,remain in 10.0A when single device is charging.
4.charge current is base the role of over current value multiply by device’s quantity then divide by two if more than two device is charging.
5.charge current will be cleared and set the chargeable value to 0A when any single cell voltage more than +30mV compare to over voltage protection value with battery pack in parallel.
Q:what if customer want to purchase BMS but the inverter in use is not in compatible list.
A:Customer need to provide the communication protocol of their inverter.
Q:Battery monitoring software not working or load protocol failure.
A:1.Download new program.2.set the correct format language(as below)
Q:The functions of heating and heating pad choosing.
A:BMS with heating function need to customized because the heating pad size is not specific,customer need to purchased by themself and current can not over 4A.
Q:The specification of 12V BMS in series or in parallel.
A:In series or in parallel is available but only individually,4 BMS is limited in series but no limit in parallel.
Q:About firmware program upgrade.
A:Not allow to upgrade the Firmware program without permission,after sales service is not available if its cause any damage.
Q:The temperature shows at -50℃
A:NTC temperature sensor damaged or welding disengaged.
Q:The conditions to use one key to power on/off.
A:Master BMS can control slave one to power on or off when battery working in parallel.it could not be one key to power on/off if master address is not dial(the new version BMS can be dial automatically) and all BMS is not in standby mode(because current of the battery will flow each other if there is not in standby mode when in parallel).
Q:Is it the BMS can change to another model to use by load the parameter?
A:NO(such as 13S and 14S,15S and 16S can be changed by load the parameter,but this will not recommended because it could be lead to malfunction)
Q:Running normal but there is busbar over voltage warming.
A:Please check if battery circuit connection is correct.
Q:Is there any other way can know the status of BMS?
A:1.browse on PC software.2.check the message on LCD screen.3.check the status of LED in BMS(as description of manual)
A: NO, they are different version of the chip.
Q: Is it an equalizing function, active or passive and what is the equalizing current?
A:It’s a passive equalizing function with 150mA current.
Q: What is the connection mode of communication when BMS communicates with inverter or 485 communication and CAN communication?
A: External communication means that BMS is connected to CANBUS interface when communicating with inverter (RS485 interface is
used for communication with Voltonic inverter)
Q: The BMS cannot work and indicator does not light up.
A: May be caused by D4 diode damage.
Q: Which BMS model suitable for ternary lithium battery?
A:The ternary lithium battery can support up to 14S version of the BMS. The firmware version of the ternary lithium battery BMS is
different from the lithium iron phosphate BMS and cannot be used universally.
Q: SMA and Victron inverter will report fault when BMS is fully charged.
A: The fault can be solved by refreshing the firmware program (version 2.8). The V16 BMS does not have this fault.
Q: Voltronic inverter and its licensed inverter only have 485 communication version of BMS or new version of BMS (V16 version).
How to use the inverter?
A: The Voltonic inverter uses RS485 interface for communication. DIP dialing is different from other versions of BMS. Connect and
dial 1on to the host, 2on to the first slave, and 3on to the second slave. You can ask me to send relevant documents.
Q: How is BMS function of SOC calculating and cycle life counting work?
A: First, modify the rated capacity of the battery, then complete a full charge and discharge process,the actual battery capacity will be learned.SOC is calculated by capacity accumulation and voltage calibration.It has the function of calculating the number of charging and discharging cycles. When the cumulative discharge capacity of the battery pack reaches the set full capacity.At 20% (default), the number of cycles increases one,the set value of battery cycle
capacity parameter can be changed through the upper computer.
Q: The issue of battery monitoring software cannot see the master when multiple BMS are in parallel.
A:When multiple BMS are in parallel, the battery monitoring software cannot see the information of the master, only see the information of the slave. If you want to see the information of the master, you need to turn off the DIP of the master and connect it separately or use the LCD screen with Bluetooth function, or use the onboard BMS with Bluetooth function.
Q: Why not message display on LCD screen?
A: The function of LCD did not open.Poor contact of connecting or broken wire of LCD screen.The new version BMS with Bluetooth, but install with an LCD screen without Bluetooth.
Q:limited algorithm of charge current.
A:Unbalanced in current distributed.
1.no charge current if any device is in charging warning of voltage,temperature,and capacity or charging protection.
2.charge current values remain in 10.0A when no device in charging.
3.charge current is base the role if over current is greater than 20.0A then reduce 10.0A,otherwise,remain in 10.0A when single device is charging.
4.charge current is base the role of over current value multiply by device’s quantity then divide by two if more than two device is charging.
5.charge current will be cleared and set the chargeable value to 0A when any single cell voltage more than +30mV compare to over voltage protection value with battery pack in parallel.
Q:what if customer want to purchase BMS but the inverter in use is not in compatible list.
A:Customer need to provide the communication protocol of their inverter.
Q:Battery monitoring software not working or load protocol failure.
A:1.Download new program.2.set the correct format language(as below)
Q:The functions of heating and heating pad choosing.
A:BMS with heating function need to customized because the heating pad size is not specific,customer need to purchased by themself and current can not over 4A.
Q:The specification of 12V BMS in series or in parallel.
A:In series or in parallel is available but only individually,4 BMS is limited in series but no limit in parallel.
Q:About firmware program upgrade.
A:Not allow to upgrade the Firmware program without permission,after sales service is not available if its cause any damage.
Q:The temperature shows at -50℃
A:NTC temperature sensor damaged or welding disengaged.
Q:The conditions to use one key to power on/off.
A:Master BMS can control slave one to power on or off when battery working in parallel.it could not be one key to power on/off if master address is not dial(the new version BMS can be dial automatically) and all BMS is not in standby mode(because current of the battery will flow each other if there is not in standby mode when in parallel).
Q:Is it the BMS can change to another model to use by load the parameter?
A:NO(such as 13S and 14S,15S and 16S can be changed by load the parameter,but this will not recommended because it could be lead to malfunction)
Q:Running normal but there is busbar over voltage warming.
A:Please check if battery circuit connection is correct.
Q:Is there any other way can know the status of BMS?
A:1.browse on PC software.2.check the message on LCD screen.3.check the status of LED in BMS(as description of manual)
Please NOTED
Title goes here.
Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.
Why Docan the BEST supplier for you?
*DOCAN is the DIRECT DISTRIBUTOR OF CATL/REPT/CALB/Lishen/Yinlong/HiGee/Gotion evemanufactures
*Here we guarantee: all cells are Authentic A Grade battery, new brand battery with factory QR code on it can verify.
*Ready stocks for fast delivery service (24H Shipping /48H tracking number provided) from EU/USA stock.
*Support refund if used cell, bad quality cell or damaged shipping received from us!
*Every week new arrival FRESH stocks for Lifepo4 cell. Do not worry about stocks problem with us.
DIY 72V~87.6V Solar LiFePO4 battery, you need 24pcs
DIY 48V~58.4V Solar LiFePO4 battery, you need 16pcs
DIY 24V~29.2V Solar LiFePO4 battery, you need 8pcs
DIY 12V~14.6V Solar LiFePO4 battery, you need 4pcs
And so on....If you have any questions about assemble the battery pack, please click here to talk more with Docan Amy (100%Technical Support PLUS 100% aftersales service)
Contact Official Docan Tech
Every week new arrival FRESH stocks for Lifepo4 cell(EV,CATL,Lishen,Calb,Rept,Ganfeng...)
TEL. Whatsapp. Wechat ID: +86 13530412339
Facebook feedbacks group: https://www.facebook.com/groups/1156652185086422
Docan Power, Power Your Life, Enjoy your life
Docan Power, Power Your Life, Enjoy your life
Contact HERE to quick talk through Alibaba
Click HERE to send details inquiry in Alibaba
Похожие товары
Jk Bms JK-BD6A24S8P для литий-ионного аккумулятора 24s 80a умный активный баланс с Rs485 может Bluetooth
25,50-47,00 $
8-канальная литиевая батарея тестер для зарядки аккумулятора и разрядки испытательной машины
900,00-1 100,00 $
Тестер короткого замыкания испытательная машина система для исследования литий-ионных аккумуляторов
1 990,00 $
Солнечная батарея BMS плата контроллер WiFi Bluetooth LCD светодиодный дисплей 16s литиевая LiFePO4 баланс мощности
54,00-63,00 $
48V/60V/72V BMS 16s 17s 18s 19s 20s 50a для 72V 74V литий-ионный/литий-полимерный 60V 64V LiFePO4 Размер аккумуляторной батареи l140 * W65 T12мм
25,00-30,00 $
GCE Высокое напряжение BMS надежный 75S 240V 50A с трехуровневой защитой для максимальной эффективности литиевой батареи
559,00-645,00 $
B5A25S60P умный Сплит Bms 5A активный баланс Высокое напряжение с BT Rs485 Canbus
79,69-89,05 $
Новые поступления
Новинки товаров от производителей по оптовым ценам
Лучшее качество детские подгузники для сухих подгузников новорожденных размер 2 4 и большие доставка или
3 $
Выключатель для формованного корпуса Schneider NSX100N 50KA AC 3P3D 25A TMD новая модель C10N3TM025
Буф2-.. М .. Краны
Оптовая продажа высококачественный сублимированный клубничный порошок Заводская поставка
5,50-6,40 $
Инструмент для снижения ударов и вибраций бурения на месторождениях гидравлические амортизирующие Подводные устройства с радиальным осевым направлением
12 000-14 000 $
Резьбовые титановые трубы ПВХ оболочка теплообменника для тепловой насос плавательного бассейна охладитель аквариума испарителя
147-182 $
Корица специи продукты Конкурентоспособная цена на экспорт из Вьетнама оптовая продажа высокое качество корица натуральные
5,50-6,40 $
