Сохранить в закладки 1600837626449:
Brief introduction | ESP32-DevKitC V4 is a small-sized ESP32-based development board produced by Espressif. This board has a rich peripheral set. The built-in ESP32 pinout is optimized for hassle-free prototyping! Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-DevKitC V4 on a breadboard. |
Embedded Module | ESP32-WROOM-32D / ESP32-WROOM-32U |
ESP32-WROOM-32 | A module with ESP32 at its core. |
EN | Reset button. |
Boot | Download button. Holding down Boot and then pressing EN initiates Firmware Download mode for downloading firmware through the serial port. |
USB-to-UART Bridge | Single USB-UART bridge chip provides transfer rates of up to 3 Mbps. |
Micro USB Port | USB interface. Power supply for the board as well as the communication interface between a computer and the ESP32 module. |
5V Power On LED | Turns on when the USB or an external 5V power supply is connected to the board. |
I/O | Most of the pins on the ESP module are broken out to the pin headers on the board. You can program ESP32 to enable multiple functions such as PWM, ADC, DAC, I2C, I2S, SPI, etc. |
Power Supply Options | Micro USB port, default power supply, 5V / GND header pins, 3V3 / GND header pins |
What You Need | * ESP32-DevKitC V4 board * USB A / micro USB B cable * Computer running Windows, Linux, or macOS |
Новинки товаров от производителей по оптовым ценам