Сохранить в закладки 1600914057470:
Product Name | China manufacturer 3D print pattern artificial synthetic grass turf for indoor outside decoration | ||||
Dtex | 4800D/8000D | ||||
Density | 20000 | ||||
Pile Height(mm) | 15mm/25mm | ||||
Gauge (inch) | <1/4''(estimate) | ||||
Warranty | 3 years for outdoor | ||||
Yarn shape | straight pile+curly pile | ||||
Size | 2*25m、4*25m or cumstomized | ||||
Application | Garden, yard, living room, hotel,wedding,office,playground,golf,etc |
1.Measure the ground where you want to install the artificial grass
2.Open the artificial grass roll and trim it to fit the area
3.Apply the glue onto the ground and the artificial grass backing
4.Place the joint tape on the ground and apply the glue
5.Make the joint invisible and remove the artificial grass-free border
6.After installation, you will find artificial grass looks the same as living grass, very natural and realistic.
The need to maintain an artificial turf field is fundamental for several reasons. These can be highlighted as follows:
- Longevity
- Playing performance
- Safety
- Aesthetics
The lifetime of the artificial field will be significantly reduced by a lack of maintenance. Thus the investment in the field will be undermined.
An active maintenance programme will maximize the lifetime of the installation and ensure many satisfactory years of use. The maintenance regime is based around simple principles:
- keeping the surface clean
- keeping the infill level
- keeping the fibre upright
Новинки товаров от производителей по оптовым ценам