Главная
Все Категории
Купить хороший эффект флокуляции водорастворимый полимер CPAM катионный полиакриламидный порошок для обезвоживания осадка

Купить хороший эффект флокуляции водорастворимый полимер CPAM катионный полиакриламидный порошок для обезвоживания осадка

Категория: >>>
Поставщик: Henan Saifu Trading Co. Ltd.

Цена:0,80 $ - 2,60 $*

Количество:

В избранное

Описание и отзывы

Характеристики

Products Description

water treatment Polyacrylamide

Polyacrylamide, abbreviated as PAM, is a linear polymer which is one of the most widely used varieties of water-soluble polymer compounds. Polyacrylamide and its derivatives can be used as effective flocculants, thickeners, paper enhancers and liquid drag reducers, etc., widely used in water treatment, paper making, petroleum, coal, mining and metallurgy, geology, textile Industrial sectors such as construction. Insoluble in most mailing solvents, it has good flocculation and can reduce the frictional resistance between liquids.
According to the ion characteristics, it can be divided into three types: cationic, anionic and nonionic.

Cationic Polyacrylamide

Cationic Polyacrylamide is Flocculant. It is a linear polymer dissolved in water. Molecular weights range from 6 million to 12 million. Mainly used for sewage treatment.

Anionic Polyacrylamide

Anionic Polyacrylamide is polymer. It dissolves in water. The molecular weight is about 18 million. It is mainly used to treat
industrial waste water.

Nonionic Polyacrylamide

Nonionic Polyacrylamid is a type of Polyacrylamide. The degree of hydrolysis is between 0 and 5. And it is mainly used for oil
well fluid, and acidic waste water treatment.

Poduct Name	Cationic Polyacrylamide	Anionic Polyacrylamide	Nonionic Polyacrylamide
Appearance	White Granule	White Granule	White Granule
Ion Degree	5%~60%	/	/
Hydrolysis Degree	/	15%~30%	0~5%
Solid Content	≥90%	≥90%	≥90%
Dissolution Time	≤90 minutes	≤90 minutes	≤90 minutes

Polyacrylamide Application

Application in sewage treatment

Adding polyacrylamide before sludge dewatering can produce larger flocculation mass, which is not easy to disperse during pressure filtration and has high dewatering efficiency.

Application in oil extraction

Polyacrylamide is used as a lubricant, suspending agent, clay stabilizer, oil displacement agent, water loss agent and thickener in drilling, acidification, fracturing, water plugging, cementing and secondary oil recovery, and tertiary oil recovery. Widely
used, it is an extremely important oilfield chemical.

Applied in industrial wastewater purification

In the industrial field, it can be used to treat waste water and circulating water produced by enterprises, and the purified water can be recycled again.

Applied in papermaking

As a retention aid in the paper industry, it can increase the retention rate of fillers and fine fibers; as a filter aid, it can make the slurry flocculate and accelerate the filtration of the wet paper layer in the paper machine mesh.

Usage of Polyacrylamide

1. Polyacrylamide can't be put directlr into sewage, so dissolve in water before using Polyacrylamide.
2. The dissolved water should be clean water, and without heating, but the temperature can't be cold. The temperature is higher than five degress Celsius. Otherwise it will be dissolve very slowly.

Temperature above 40 degrees Celsius affect the use effect.
3. Notice: Don't use strong acid, strong base, high salt water preparation.
4. The ratio range is recommended to be between 0.1% and 0.3%. For example, 1 liter of water with 1~3g of agents.
5. If because of other reasons, the dispersion is not good, we suggest that you mix a little more sparse.
6. The water is warmer in Summer. Cationic, Anionic Polyacrylamide should be strict for about 1 hour. Nonionic Polyacrylamide should be strict for about 2 hours.
7. The water is cold in Winter, Cationic, Anionic Polyacrylamide should be strict for about one and a half hours. Nonionic Polyacrylamide should be strict for about 3 hours.

Product packaging

polyacrylamide is usually packed in 25kg, pp bags or paper plastic composite bags. Of course, we mainly focus on customers, packaging according to customer's requirement.Within 7 working days after receiving the payment.

Company Profile

Certifications

Foreign Visitors

FAQ

Q1:Can i get free samples?
we can provide you a ceratin amount of free samples, please contcacty us directly.
Q2:How can i get the price of PAM?
Please give us the exact quantity, packing, destination port and other necessary information. We will send you quotation according to your specific requirments.
Q3:I am not sure whether your product is appropriate in my case, what should i do?
The best way is that we can deliver free certain quantity (below 5kg) samples to you according to your usage. If you think it can satisfy you, we will quote a price for you. Then you can place an order.
Q4:I am a small wholesaler ,do you accept a small order of cationic polyacrylalmide?
It is no problem if you are a small wholesaler. We would like to grow up with you together.
Q5:How to use PAM?
We have the product details. If it is still not very clear for you, please contact us now. Contact Supplier.

Новые поступления

Новинки товаров от производителей по оптовым ценам