Автомобильные инструменты для демонтажа подшипников ремонта автомобилей съемник установка снятия набор ручных инструментов 2-14 мм
92,74 ₽ - 96,06 ₽
Сохранить в закладки 1600933291294:
How to use the tools ? -Clean damage surface with a clean wet cloth; -Put the glue stick to gun and connect the power source and preheat for 5-10 minutes; -Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);)(Note: The larger the drawing gasket is, the larger the drawing force is); -Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); -Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; -When dent was removal, clear the glue by alcohol with plastic shovel; -If dent still exists, knock it slightly with a flattening hammer with Tapdown head 8 Repeat the operation steps above until the dents are repaired. | ||||||||
Новинки товаров от производителей по оптовым ценам