Handskit 936A 65 Вт регулируемый трансформатор для паяльной станции 20s ремонтные сварочные инструменты A1321 нагреватель с сердечником 900 м

Описание и отзывы

Характеристики

Basic operations

Solder Stand and Sponge

When needed, squeeze a small sponge with wet water and put it in the soldering iron rack to clean the soldering iron tip, and the sponge must be kept moist to clean the soldering iron nozzle.

 Soldering Iron Connecting

When you need to work, remember to turn off the handle when connecting it to the host to avoid damage to the circuit board, and put the handle into the soldering iron rack after connecting

 Temperature Setting

200-480℃(356-896℉)

The temperature adjustment is adjusted using the encoder knob, the adjustment knob is turned on, the temperature is adjusted clockwise, the temperature is adjusted counterclockwise, and when the knob is released when the temperature is adjusted to the desired temperature, it will enter the heating constant temperature state. Temperature regulation range of 200-480°C (356-896°F)

Constant temperature status  

Turn on the power switch, when the soldering iron rises to the selected temperature, the heater indicator will flash to indicate that soldering work is available

 Temperature correction  

Whenever the soldering iron core or handle is replaced, plug the handle into the socket of the welding station, set the temperature to 400°C or 750°F, turn on the power and wait for the temperature to stabilize, you need to prepare a thermometer, use a -zig screwdriver at CAL to fine-tune the potentiometer, until the thermometer shows 400°C or 750°F.

Maintenance and use of soldering iron tips

 The temperature of the soldering iron tip is too high will weaken the service life, so try to choose 300-350 degrees, this soldering station is fast to reheat, and the lower temperature can also be easily welded to protect circuit boards and components,

Use the cleaning sponge regularly to clean the soldering tip, the oxides and carbon compounds derived from the flux after soldering will damage the thermal conductivity function and soldering error of the soldering tip, and should be cleaned up every cycle.

When not using the soldering iron, do not let the soldering iron tip be in a high temperature state for a long time, which will also convert the flux on the soldering iron tip into oxide and reduce the heat conduction of the soldering iron tip.

After use, the soldering iron tip should be cleaned first before the tin is applied to the soldering iron tip to prevent oxidation

Troubleshooting guide

Before repairing, the power should be turned off to avoid electric shock accidents, if the wire is damaged, you should ask a professional or return to the manufacturer or agent to repair it, so as not to harm the body and damage the welding station.

The heat indicator does not light up/ the indicator light is on, tip does not heat up

1.1.

Is the fuse blown out? After determining the cause of burning the fuse, please replace it with a new one.

1.2

Whether the internal circuit board of the handle is short-circuited, whether the grounding spring touches the heating core lead, .

1.3

 Whether the heating core is twisted and short-circuited, and whether the wire plug is well linked