Handskit T12 Пинцет паяльная станция для SMD электронных компонентов ремонт чипа резисторов комплект депайки конденсаторов

Описание и отзывы

Характеристики

This soldering station uses STM32F103 single-chip microcomputer as the main control chip. Through AD sampling and PID calculation, it can control the PWM output and realize the temperature control of the T12 heating core. It has the functions of rapid heating, automatic constant temperature, temperature compensation and vibration induction. It supports various standby, sleep modes, temperature calibration and switching of head with nozzle.

The soldering station uses SSD1306, a driven OLED display, and the accurate soldering iron temperature, ambient temperature and power supply voltage are displayed on the screen in real time. The soldering station uses the EC11 encoder as the user input port. The soldering station uses a mercury switch to periodically detect the status of the soldering iron handle. It can automatically sleep or not work for a long time, and can effectively improve the service life of the soldering tip through sleep and standby.

  Basic operation

Knob button function

1. Press once to enter the adjustment temperature range

2. Rotate the host to the left to enter standby

3. Rotate to the right with one key heating function

4. Press and hold the button for 3 seconds to enter the menu setting

5. Press and turn left to calibrate the cold end of the welding tip

6. Press and turn to the right to select the welding tip

1. Standby settings

1. There are 4 types of wake-up modes, and the default is vibration (recommended)

1.1 Manual-Only the rotary encoder can wake up

1.2 The switch is awakened by the power supply

1.3 Waking up by vibrating handle

1.4 Automatically wake up by the system

2. Standby time-you can set 1 to 60 minutes, according to your choice, the default is 10 minutes

3. Standby temperature-you set it between 50-300℃, and the default is 200 according to your choice

2. Automatic sleep setting

2.1 Automatic sleep time, enter the silent setting sleep time, according to your choice, the setting range is 0-60 minutes, the default is 30 minutes, when in sleep state, the temperature of the soldering iron tip will be reduced to protect the life of the soldering iron tip.

Three. One-key enhanced temperature setting

One-key boost function-(the main screen quick setting-rotate to the right, used for temporary rapid temperature rise and ultra-high temperature use, the highest temperature can be used at 580°C, set to 480, and enhanced set to 100°C)

3.1 Set temperature: -10-100℃ can be set, the default is 50 degrees

3.2 Enhanced temperature time -1-30minute can be set, the default is 5 minutes

4. Cold junction-increase calibration (host page press and hold the knob and turn left to quickly set)

4.1 Thermistor / CPU-select NTC test and CPU SET for temperature compensation

4.2 The calibration temperature is modified according to the measured temperature -9-99℃. The default is 24,

5. Calibrate the soldering iron tip (hold and rotate to the right on the host page, select your soldering iron tip model)

6. Stepping temperature 1-50℃, the default step of adjusting temperature is 5

7. Password setting

7.1 Password switch (default closed)

7.2 Lock time 1-60Min, you can set it, the default is 5

7.3 Password. You can set 4 numbers, don’t forget the password, the default value is 8888,

8. Screen protector

8.1 Screen saver on/off (open by default)

8.2 Waiting time 1-60 minutes, the default is 5

9. Buzzer switch settings-Button/arrival/sleep temperature will make a sound, default on

10. Input the voltage of the power supply, the screen displays on/off

11. Low voltage protection settings

11.1 Low voltage protection-on/off

11.2 Alarm voltage, the default is 19.8V, when the input voltage drops by 19.8, it will alarm

11.3 Automatic protection voltage-the default is 18v, the screen will be turned off if the input voltage is lower than 18v

12. Power-on state-sleep/standby/run after power-on, the default is running

Thirteen. Fourteen. Solder sucker mode (not supported)

15. Language-Chinese/English

16. Date and time setting-

-Seventeen. Adjust the daily error-0-60 seconds, the default is 0

18. Time reset

19. System Information

Twenty. Restore factory settings

21. Exit the settings

Common mistakes

Note that after confirming that the accessories are installed correctly, insert the new soldering iron tip into the handle. Sometimes the display will flicker or ERROR, and the host buzzes to report an error. This is normal, because it is a new soldering iron tip. After heating for 5-20 minutes, it will gradually return to normal. The temperature of the soldering station is controlled at 200-480℃. The commonly used soldering temperature is 300-380℃. To protect the service life of the soldering iron tip, it is recommended that the temperature should not exceed 380℃.