IHF фторопластовый насос высокотемпературный и устойчивый к коррозии ОКСАЛАТ уксусной кислоты химический центробежный
360,00-522,00 $
ПВХ химический насос JWM Тип дозирующий
- Категория: >>>
- Поставщик: Shandong Zhongrong Fuxing Group Co. Ltd.Shandong Ltd.
Сохранить в закладки 1600950621060:
Описание и отзывы
Характеристики
1、 Overview of diaphragm metering pump
JXM and JWM are reciprocating compound dosing pumps designed and developed by our company. The JXM pump has a delivery flow of 500L / h and a pressure of 1.2MPa '(depending on the pump model); the delivery capacity of the pump reaches 2000L / h and the pressure reaches 1.0MPa (depending on the pump model). The j WM pump has a capacity of 150 l / h and a pressure of 1.0 MPa (depending on the pump model). The feature of JXM series pumps is that the diaphragm is mechanically driven. The diaphragm cancels the compound structure of PTFE film, rubber and iron core, which increases the diaphragm stroke. The stroke adjusting mechanism is based on the working principle of variable eccentric mechanism, replacing the traditional effective stroke adjustment design of eccentric cam. This design reduces the pulsation degree of pressure and flow, makes the flow rate in the range of 10-100%, and the stability accuracy can be controlled within ± 2%.
2、Significance of diaphragm metering pump model
JXM and JWM are reciprocating compound dosing pumps designed and developed by our company. The JXM pump has a delivery flow of 500L / h and a pressure of 1.2MPa '(depending on the pump model); the delivery capacity of the pump reaches 2000L / h and the pressure reaches 1.0MPa (depending on the pump model). The j WM pump has a capacity of 150 l / h and a pressure of 1.0 MPa (depending on the pump model). The feature of JXM series pumps is that the diaphragm is mechanically driven. The diaphragm cancels the compound structure of PTFE film, rubber and iron core, which increases the diaphragm stroke. The stroke adjusting mechanism is based on the working principle of variable eccentric mechanism, replacing the traditional effective stroke adjustment design of eccentric cam. This design reduces the pulsation degree of pressure and flow, makes the flow rate in the range of 10-100%, and the stability accuracy can be controlled within ± 2%.
2、Significance of diaphragm metering pump model
3、 Model features of diaphragm metering pump
The structure is simple and compact, and the maintenance is convenient.
·Double eccentric cam, smooth driving structure.
·Oil immersed lubrication, regular replacement of lubricating oil, Runhua system does not need special maintenance.
Flow regulating mechanism, which can adjust the flow easily when the product is running or stopped.
·PTFE and rubber composite membrane, corrosion resistance, long life, suitable for conveying all kinds of corrosive, dangerous liquid.
·A variety of optional over-current materials can be customized according to the use requirements, so as to transport various corrosive and non corrosive liquids.
·High safety performance, can transport all kinds of flammable, explosive, radioactive, strong corrosive liquid.
·It can be equipped with frequency conversion motor to receive 4-20mn, a signal to adjust the flow; external automatic control.
It can be equipped with a stroke regulator to automatically adjust the flow rate.
The structure is simple and compact, and the maintenance is convenient.
·Double eccentric cam, smooth driving structure.
·Oil immersed lubrication, regular replacement of lubricating oil, Runhua system does not need special maintenance.
Flow regulating mechanism, which can adjust the flow easily when the product is running or stopped.
·PTFE and rubber composite membrane, corrosion resistance, long life, suitable for conveying all kinds of corrosive, dangerous liquid.
·A variety of optional over-current materials can be customized according to the use requirements, so as to transport various corrosive and non corrosive liquids.
·High safety performance, can transport all kinds of flammable, explosive, radioactive, strong corrosive liquid.
·It can be equipped with frequency conversion motor to receive 4-20mn, a signal to adjust the flow; external automatic control.
It can be equipped with a stroke regulator to automatically adjust the flow rate.
Part name | |||
1 | Leakage joint | 1 | Borrowed parts |
2 | Sealing ring for shaft | 1 | |
3 | Hexagon socket screw | 4 | |
4 | Crosshead | 1 | |
5 | O-type rubber sealing ring | 1 | |
6 | Composite bushing | 1 | |
7 | Cover as-filler | 1 | Borrowed parts |
8 | Drain plug | 1 | |
9 | Tapered roller bearing | 1 | |
10 | worm | 1 | |
11 | Cabinet | 1 | |
12 | Elastic cylindrical pin | 1 | |
13 | coupling | 1 | |
14 | electric machinery | 1 | |
15 | Hexagon socket screw | 4 | |
16 | Composite bushing | 1 | |
17 | Crosshead pin | 1 | |
18 | Circlip for hole | 2 |
Number type | flow (L/h) | pressure (MPa) | Pump speed (uim) | trip (mm) | Diameter of inlet and outlet (mm) | Motor power (KW) |
DJZ 2.25/1.2 | 2.25 | 1.2 | 36 | 1.2 | DN8 | 0.25 |
DJZ 5/1.2 | 5 | 48 | ||||
DJZ 10/1.2 | 10 | |||||
DJZ 22/1.2 | 22 | 4 | DN15 | |||
DJZ 50/1.0 | 50 | 1.0 | ||||
DJZ 85/1.0 | 85 | 72 | 6 | 0.37 | ||
DJZ 120/0.7 | 120 | 0.7 | 96 | 8 | ||
DJZ 170/0.7 | 170 | 6 | ||||
DJZ 240/0.7 | 240 | 144 | 8 | DN25 | ||
DJZ 315/0.5 | 315 | 0.5 | 0.55 | |||
DJZ 400/0.5 | 400 | 10 | DN15 | |||
DJZ 500/0.5 | 500 | |||||
DJD 80/1.0 | 80 | 48 | DN15 | 0.75 | ||
DJD 175/1.0 | 175 | 96 | ||||
DJD 237/1.0 | 237 | |||||
DJD 365/1.0 | 365 | |||||
DJD 410/1.0 | 410 | |||||
DJD 480/0.7 | 480 | |||||
DJD 580/0.7 | 580 | 144 | DN25 | 1.1 |
Fault phenomenon | reason | Clearance method |
1.Shaft center not aligned 2. Power failure 3. The fuse is burnt out and the circuit is disconnected 4. The line is disconnected; 5. The wiring is wrong; 6. The shut-off valve is closed | 1. Link and align 2. Check power supply 3. Replace larger fuse 4. Find out where to disconnect and repair 5. Check wiring diagram 6. Open valve | |
1. The motor does not run 2. The line is blocked 3. The supply tank is empty 4. The ball check valve enters the solid matter 5.The pipeline valve is closed 6. The air pocket 7. The filter is blocked 8. The perfusion loss | 1. Check the power supply and check the circuit diagram 2. Clean and flush the circuit 3. Inject liquid 4. Carry out cleaning inspection 5. Open the pipeline valve 6. Increase the suction pressure 7. Remove the cleaning and replace if necessary 8. Refill to check whether there is leakage | |
1. Motor speed is too low 2. Plunger cap is worn or hardened due to impurities 3. Product cavitation 4. Product viscosity is too low 5. Standard system error 6. Check valve wear or dirt | 1. Check the voltage, frequency, wiring and terminal connection. 2. Check the plunger cap and replace it if it is aged. 3.Increase the suction pressure and cool the product if necessary. 4. Raise the product temperature to reduce the viscosity. 5.Judge and correct. 6. Clean and replace if damaged | |
1. The gear box is too full; 2. The pump head gasket is leaking; 3. The cover gasket is leaking; 4. The oil seal is leaking; 5. The diaphragm is broken | 1. Remove the excess oil 2. Replace or tighten the pump head bolt and seal 3. Replace or tighten 4. Replace 5. Replace | |
The air is continuously discharged from the automatic relief device | 2. Suction pressure too low 3. Oil level in mailbox too low | 1. Change the type of oil, consult the manufacturer; 2. Increase the pressure; 3. Refill to the correct oil level |
1. Too high discharge pressure 2. Bearing wear 3. Gear wear 4. Worm upper rocker shaft 5. Eccentric or turbine 6. Hydraulic bypass valve setting too high | 1. Reduce the pressure or reduce the pipe size 2. Replace 3. Replace the gear adjustment hydraulic bypass valve 4. Add gasket to thrust 5. Tighten or replace 6. Readjust | |
1. Pump overload 2. Oil viscosity too high 3. Low pressure 4. Loose wire 5. Mechanical constraints | 1. Check the operating conditions according to the pump design value 2. Use light oil 3. Check the power supply 4. Find and repair 5. Check the gear box machinery | |
2. Pump head or joint damage | 1. Stop pumping, remove the leakage part, and check the deformation and damage. If necessary, O-ring and other parts should be replaced with new ones. 2. Stop running the pump, remove the leakage part and replace the new one |
1、 Product name and model ① caliber ② lift ③ motor power ④ flow rate ⑤ rotational speed ⑥ voltage ⑦ suction lift and whether the medium is equipped with accessories so that we can correctly select the type for you
2、 If the product model of our company has been selected by the design unit, please send it to Shandong East Pump Company for purchase.
3、 When the use environment is very important or complex, please provide the design drawings and detailed parameters as far as possible, and the technical experts of our company will check for you.
Product price attribute is for reference only, please call Wangwang for details!
2、 If the product model of our company has been selected by the design unit, please send it to Shandong East Pump Company for purchase.
3、 When the use environment is very important or complex, please provide the design drawings and detailed parameters as far as possible, and the technical experts of our company will check for you.
Product price attribute is for reference only, please call Wangwang for details!
Похожие товары
0.5 л.с. 0.37KW струй серии 60 самовсасывающий Электрический водяной насос (ce iso 9001)
Фторный пластиковый химический центробежный насос
300,00-550,00 $
Химический насос с фторопластовой футеровкой из нержавеющей стали LHF
1450 об/мин 125 hp 200 электродвигатель Разъемный Картер водяной насос для сельскохозяйственного орошения
950,00-990,00 $
Высококачественный воздушный насос для ароматерапии лампа мини с длительным временем работы
5,00 $
4kw 2-дюймовый промышленный высоковакуумный циркуляционный вакуумный насос компрессор с водяным кольцом
250,00-300,00 $
Химический дозирующий насос из нержавеющей стали MS1 SEKO
Новые поступления
Новинки товаров от производителей по оптовым ценам
Выключатель для формованного корпуса Schneider NSX100N 50KA AC 3P3D 25A TMD новая модель C10N3TM025
Буф2-.. М .. Краны
Оптовая продажа высококачественный сублимированный клубничный порошок Заводская поставка
5,50-6,40 $
Инструмент для снижения ударов и вибраций бурения на месторождениях гидравлические амортизирующие Подводные устройства с радиальным осевым направлением
12 000-14 000 $
Резьбовые титановые трубы ПВХ оболочка теплообменника для тепловой насос плавательного бассейна охладитель аквариума испарителя
147-182 $
Корица специи продукты Конкурентоспособная цена на экспорт из Вьетнама оптовая продажа высокое качество корица натуральные
5,50-6,40 $
Цепь из нержавеющей стали с большим шагом сверхпрочная цепь трансмиссии C2052/C2062/C2082 промышленная гибочная
