Серия OMA высококачественный гелиевый водородный кислородный азотный газовый бустерный насос

Сохранить в закладки 1600988617095:


Цена:*

Количество:

  • В избранное

Описание и отзывы

Характеристики



Introduction


OMA-Series
This series of pump uses single pneumatic non-equilibrium gas distributing valves to move to and fro automatically. The drive parts of the pump are made of aluminum alloy or stainless steel. The full set of sealing parts is imported. The maximum drive
pressure is 10bar. We suggest customers use air pressure≤8bar to ensure long lifespan of the pump.
The diameter of the drive piston is 160mm. This pump is single acting. The pump heads can cool the exhaust air.




Product Paramenters


(Note: PL: driven air pressure PA: gas inlet pressure PB: gas outlet pressure)


Model
PressureRatio
Min inlet pressure (bar)
Max inlet pressure(bar)
Max outlet pressure(bar)
Inlet size
Outlet size
Max flow L/Min (PL=6 bar)
OMA02
2:1
1.7
16
16
ZG1/2''
ZG1/2''
412@PA-6
OMA05
5:1
3.5
40
40
ZG1/2''
ZG1/2''
169@PA-6
OMA10
10:1
5.5
80
80
ZG1/4''
ZG1/4''
196@PA=20
OMA25
25:1
10
200
200
ZG1/4''
ZG1/4''
81@PA=20
OMA40
40:1
15
320
320
ZG1/4''
ZG1/4''
40@PA=20
OMA60
60:1
25
480
400
ZG1/4''
ZG1/4''
61@PA=40
OMA100
100:1
35
800
800
ZG1/4''
ZG1/4''
39@PA=40


Product Advantages


1.Compressed Air driven - no electricity required (connect to normal air compressor)
In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
2.No airline lubricator required
3. Hydrocarbon free-Separation between air drive and gas booster sections
4.Wide range of models with different ratios
5.Built-in-cooling unit inside each models
6.Easy to install, operate and maintain
7. High quality seals, long life service available
8. Gas drive, No heat,flame or spark risk and explosion proof
9.Automatic pressure holding, whatever the cause of the pressure drop, the pump will automatically start, keep the loop pressure constant
10. All components of the contact with the gas are made of aluminum or stainless steel


Details Images






Company Profile










Packing & Delivery




FAQ


Q1: What's your main products of your company?
A1: We specialized in all kinds of machines ,such as engine stand Hydraulic press riveting machine test bench brake riveting machine and so on .

Q2: Where is our factory located? How can I visit there?
A2 : Add: Opposite to Quanfu Village Arch, Taohuayuan Road, Ping'an Street, Changqing District, Jinan, Shandong Province

Q3: What is your trade terms?
A3 : FOB, CFR and CIF all acceptable.

Q4: What's the Payment Terms ?
A4 : T/T ,50% initial payment when order ,50% balance payment before shipment ;Irrevocable LC at sight .

Q5: What's the MOQ?
A5: 1 set .(Only some low cost machines will be more than 1 set )


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам