►The newly designed sampler case provides convenient fixation of the sampler while also providing good insulation protection.
►The display module has a built-in buzzer, and when the instrument enters protection mode, the remaining alarm sounds and a pop-up
reminder appears on the display screen.
►The display module uses a 2.4-inch high-definition color LCD screen, with optimized interface upgrades and larger, clearer text.
The buttons use silicone material, which, on the basis of good operational fluency and fast response speed, adds comfortable
tactile feel.
►The product automatically recognizes and detects the current in both charging and discharging directions.
►It is suitable for various batteries: ternary lithium batteries, lead-acid batteries, lithium iron phosphate batteries, etc., as
long as the battery is within the voltage measurement range.
►The shunt and screws are made of pure copper material, with good conductivity, low heat generation, and low power consumption. In
standby mode, it does not consume too much battery power.
►The communication protocol is open source and uses 485 communication, which can be developed on tools such as serial port
assistants. By switching communication addresses, it is possible to control 99 meters separately.
►It supports mobile app control. After downloading and installing the app, it can be connected via Bluetooth to view all relevant
data and curves, and all functions can be set through the app.
►The mobile app has a curve viewing function, which can display real-time and historical curves of voltage and current, and also
supports the export of historical data.
►The product can be set to overvoltage, undervoltage, overcurrent, over power, external over-temperature protection, etc. When the
value exceeds the protection value range, the instrument output status is turned off (requires cooperation with a relay) to
prevent damage to electrical equipment. It can also be set to protection recovery time and delay time, suitable for various
occasions.