Паяльник для горячего воздуха 1500 Вт термоусадочная упаковка мобильная ремонтная Тепловая станция

Сохранить в закладки 1601031095070:


Цена:1 080,07 ₽ - 1 164,31 ₽*

Количество:

  • В избранное

Описание и отзывы

Характеристики


1500 W 1500 W hot air  soldering  gun shrink packaging mobile repair heat gun station


604_03604_04604_05604_06604_07604_08604_09604_10604_11604_12604_13604_14604_15 


Operating Instruction


The characteristics


1. High quality heating core, fast heating up, long service life


2. Imported super quiet motor, low noise, long service life.


 


The main use


1. Heating and drying of electronic components


2. Local heating and drying of equipment and accessories.


3. Large area or local heating and drying of wood, furniture, etc.


4. Paste physical preheating before operation. 


5. Heat and separate and dismantle the attached objects. 


6. Clothing and fabric debris removal


 


The security


1. Anti-overheating design, built-in temperature control switch in heating core to prevent high temperature.


2. The air outlet is reliably grounded and safe to use.


3. The barrel is made of engineering plastics, with good heat resistance and shockproof performance.


 


Use method


1. Plug in the 220VAC power supply and adjust the appropriate temperature and air volume according to the requirements of the heated object.


2. Swing the air outlet evenly at the object to be heated, so that the object is heated evenly.


3. After heating, turn off the power switch in time and place the air outlet with the heat gun facing upwards.


 


 


Matters needing attention


1. Before using the heat gun, check whether the power supply voltage is consistent.


2. Check whether the air inlet and outlet of the heat gun are blocked by dirt. If so, clear them in time.


3. When using the heat gun, the temperature of the air outlet is very high. Do not let the air outlet close to fusible and explosive items, and do not touch the air outlet with your hands and clothes.


4. After use, the temperature of the air duct is relatively high. Do not let any articles contact the air duct, and the air duct should be placed upward


 


COMPAMY INFORMATIONS



company information


 FAQ





FAQ


FAQ.jpg 




 


 


 


Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам