Высококачественная Высокая Скорость Восстановления 99% чистоты концентрационные мембраны для восстановления Пропиленовой

Сохранить в закладки 1601049021641:


Цена:41 000,00-59 000,00 $*

Количество:

  • В избранное

Описание и отзывы

Характеристики



Membrane-Assisted Organic Steam Recovery Membrane Steam Organic Recovery Membrane-Based Organic Steam Reclamation
All Wholesale High Performance 99%Purity Organic Steam Recovery Membrane System for Ethylene Recovery




Technical Principle


Membrane Organic Steam Recovery Equipment

Organic vapor membrane separators primarily come in two types: roll membranes and stack membranes.
Organic vapor separation membranes are rubbery polymer membranes. The separation process relies on solubility selectivity, where differences in the solubility and permeation rates of organic vapors in the membrane are utilized. Gases with larger molecular weights and higher boiling points (e.g., ethylene, propylene, chloromethane, vinyl chloride, butadiene) dissolve more readily and permeate faster through the membrane. This enables their separation from gases with smaller molecular weights and lower boiling points (e.g., H2, N2, CH4).




Driven by the pressure difference across the membrane, the feed stream entering the membrane system is divided into two streams: permeate and retentate. The permeate is enriched with organic vapors, while the retentate is purified light component gases.


Feature
Description
Membrane Types
Spiral-wound and stacked membranes
System Recovery Rate
Typically above 90%
System Operational Flexibility
50-200%
Recovery Period Generally
3-12 months
Ethylene Recovery Rate
80-90%
CH4 Recovery Rate
70-80%


Application case


Ethylene Recovery in Ethylene Glycol Production Unit

During the EO/EG production process, ethylene and oxygen react in the presence of a silver catalyst at a specific ratio, with
methane as a stabilizing gas. To prevent the accumulation of argon (Ar) introduced with the oxygen from air separation, a portion of the recycle gas needs to be vented, leading to losses of ethylene and methane gases.

Membrane Separation Recovery Technology Features:
* Ethylene recovery rate greater than 85%
* When methane is used as a stabilizing agent, methane recovery of over 50%





Recovery of Tail Gas from Station and Bridge Loading and Unloading

After pressure discharge from tank unloading or post-vehicle unloading tail gas passes through a buffer tank, it enters
compression/condensation, followed by gas-liquid separation to separate the liquid-phase products. The non-condensable gas from the separation tank enters the membrane separation system, where permeate gas and vacuum desorption gas return to the compressor inlet. The tail gas from the membrane separation system is enriched nitrogen gas, with non-methane hydrocarbons less than 15q/㎡ directed to the nitrogen buffer tank or further sent for adsorption purification <60mg/m, achieving an overall hydrocarbon recovery rate greater than 97%.




Recovery of Light Hydrocarbons in Polyethylene Production Processes

In the UCC process for polyethylene production, membrane separation technology helps recover over 90% of butenes and over 95% of pentanes (or ethanes) that do not condense under compression/condensation limits. This ensures efficient utilization of resources and stable operation of production lines.

In BP's fluidized bed process, where ethylene monomer conversion rates are not 100%, the membrane separation system recovers over 85% of emitted ethylene, maintaining production stability and efficiency by recycling gases effectively.




Polypropylene Production: Recovery of Propylene

In the bulk polymerization process of polypropylene production, due to limitations in compression and condensation, a portion of propylene (50-80% by volume) cannot condense and is typically burned off, leading to energy waste and environmental pollution. By employing membrane separation, over 95% of the propylene can be recovered. This recovery system offers a short return on investment period, typically around 4 months, demonstrating significant economic benefits.




Polyolefin Plant Tail Gas Recovery: Olefin and Nitrogen Recovery

Combining membrane separation technology with passive deep cooling enables simultaneous recovery of olefins and nitrogen, optimizing the process design of polyolefin plants. The olefin recovery rate can exceed 98%, while nitrogen concentration can reach over 99%.




Company Profile




WOBO Group has been engaged in the cryogenic and air separation industry for decades. It operates a variety of products such as cryogenic vessels, air separation equipment, chemical storage and transportation equipment, etc. It has always been our aim to provide customers with the best products and solutions.

WOBO Group has technically cooperated with a number of large-scale famous membrane manufacturers, and jointly developed with well-known domestic universities and colleges, and established a comprehensive laboratory for production inspection and testing. At present, WOBO membranes have been applied in more than 30 countries around the world.








Похожие товары

Новые поступления

Новинки товаров от производителей по оптовым ценам