Настраиваемый фильтр для очистки и фильтрации воды от извести
568,26-584,33 ₽
PP 1 75micron фильтр картридж для очистки воды расходный материал промышленных или бытовых систем фильтрации
- Категория: >>>
- Поставщик: Fujian Aicksn Environmental Technology Co. Ltd.Fujian Ltd.
Сохранить в закладки 1601069886768:
Описание и отзывы
Характеристики
Product Description
产品介绍：用途、功能、风格等
下面的配置一张产品图+表格里面配置产品的具体参数
Product Name | PP water filter cartridges | N.W. | 1.34Kgs |
Brand | OEM/AICKSN | G.W.: | 14.5Kgs（10pcs/CTN） |
Material | Polypropylene | Flow Rate | 54x22.5x58CM |
Temperature | 0℃~50℃ | Modes of packing | 10LPM |
Size | D9.2 x H53.2cm | Service Life | 3-6 Months, depending on water quality and consumption |
The PP Cotton filter is a tubular filter made of non-toxic and odorless polypropylene particles, which is heated and melted, sprayed, drawn, and formed. It has high filtration accuracy, large flow rate, small pressure difference, large dirt holding capacity, and small volume,high pressure resistance, corrosion resistance and other characteristics.
It is used to intercept and filter rust, silt, colloid, suspended solids, etc. in tap water, and is generally used in the first stage of filtration of water purifiers and pure water machines.
It adopts Japanese food-grade silicone disposable sealing ring, three layers of protection.
Filtration with High Efficiency:
The diameter of the fibers that make up the continuous melt-blown filter is very thin, generally 5 to 30 microns. Such fibers are entangled and interlaced with each other, and the pore size formed is less than 40 microns; but the porosity is very high, which effectively guarantees the filtration accuracy and flow rate.
The diameter of the fibers that make up the continuous melt-blown filter is very thin, generally 5 to 30 microns. Such fibers are entangled and interlaced with each other, and the pore size formed is less than 40 microns; but the porosity is very high, which effectively guarantees the filtration accuracy and flow rate.
Detailed Images
Open Bottom to replace the inner filter
Save cost, and more environmental friendly
1 pc Cartridges brand/logo
Customized by laser printing
Long Service Life
The pore size of the continuous melt-blown filter element is distributed in a gradient along the radial direction. During the filtration process, the outer layer has enough space to ccommodate
large particles to ensure that the filter element will not be blocked in a short time; at the same time, the inner layerblocks fine particles to ensure filtration accuracy, thereby improving the service life of the filter and reducing the cost.
large particles to ensure that the filter element will not be blocked in a short time; at the same time, the inner layerblocks fine particles to ensure filtration accuracy, thereby improving the service life of the filter and reducing the cost.
Related Products
Certificate
ISO9001
CE Certificate
Inner Filter NSF certified
Packing&Shipping
货物包装图4张+1张物流图片
Company Introduction
Shenzhen onetouch trading company is a wholesale company that manufactures good & high quality knitting wear and woven wear, starting from 2006. The company provides the customized products and OEM service. Various new collections and design are coming out each month with the current styles and fabrics. The factory own the proficient skill and updated machine
Specialized OEM/ODM services
AICKSN takes pride in our ability to offer OEM and ODM services. We understand the importance of branding and maintaining product differentiation in a competitive market.
Our team of engineers and designers work closely with clients to develop and manufacture water treatment systems under their brand, incorporating unique features and specifications
Our team of engineers and designers work closely with clients to develop and manufacture water treatment systems under their brand, incorporating unique features and specifications
FAQ
Q1: Why is the TDS pen only suitable for RO reverse osmosis machines and not for the detection of ultrafiltration machines?
A:The TDS pen is a tool for quickly detecting the total dissolved solid content. Because the reverse osmosis machine removes 90%-98% of the dissolved impurities in the water, while the ultrafiltration machine filters the particulate impurities, suspended solids, colloids, and other substances in the water, retaining the dissolved substances in the water including calcium and magnesium ions. Therefore, the data measured by the TDS pen is no different from that of tap water and may even be higher than that of tap water.
Q2: How long can the filter element be stored? How to store the filter element properly and reasonably?
A:Unused filter elements: Unused original filter elements should not be unpacked. It is best to store them at a low temperature of 5-10 ℃. When storing in an environment with a temperature exceeding 10 ℃, choose a well-ventilated place and avoid direct sunlight. The storage temperature should not exceed 35 ℃. Avoid storing in a humid environment and avoid water ingress. Meeting the above conditions, the new membrane element can be stored for about 3 years to ensure its service life. If the reverse osmosis machine is not used for 3 days after installation, it is necessary to turn on the faucet to drain and flush. Do not supply water
and electricity to the newly installed machine under unused conditions.
A:Unused filter elements: Unused original filter elements should not be unpacked. It is best to store them at a low temperature of 5-10 ℃. When storing in an environment with a temperature exceeding 10 ℃, choose a well-ventilated place and avoid direct sunlight. The storage temperature should not exceed 35 ℃. Avoid storing in a humid environment and avoid water ingress. Meeting the above conditions, the new membrane element can be stored for about 3 years to ensure its service life. If the reverse osmosis machine is not used for 3 days after installation, it is necessary to turn on the faucet to drain and flush. Do not supply water
and electricity to the newly installed machine under unused conditions.
Q3: What’s the order delivery time ?
A: Lead time is based on the quantity. Mostly for standard samples, 1 week; For customized item, 20-35 days.
Q4. Why choose AICKSN?
A: 1)We have the Injection workshop, filter media workshops, assembly workshops. Every part of your filters are made by ourselves. The product quality is under control. The costs is under control.
2) Most filters have international certifications such as NSF, WQA, EC-1935/2004.
3) Your filters are produced in an ISO9001 and ISO14001 factory, in the dust-free workshops and under strict production procedures and multi-QC system.
Похожие товары
Фильтр для намотки 10 дюймов микрон 20 100
Фильтрующие картриджи
Фильтрующие картриджи
Прямая Заводская поставка домашний очиститель воды быстросменный фильтр для
Дешевые оптовые пользовательские модные роскошные кувшин фильтр для воды
114,80-126,28 ₽
Заводская продажа домашний фильтр для воды с высоким потоком 50 75 100gpd мембрана чистой
258,30-373,10 ₽
Фильтр для очистки воды
551,04 ₽
Новые поступления
Новинки товаров от производителей по оптовым ценам
Светлая Золотая морская солнечная энергия ландшафтное украшение постмодерн минималистский стиль чистая ручная роспись маслом 24x3 1 дюйм/60x80
35-53 $
Европейские антикварные простой Последние двойной металлической кровати
Автоматизированная складская система автоматического хранения в Гуанчжоу Eyda с эффективными стеллажами и
10 000-35 000 $
Декоративный чехол для PS5 Сменный Чехол консоли пластины Playstation5 пылезащитный с защитой от царапин
7,50-7,70 $
Лучшее качество детские подгузники для сухих подгузников новорожденных размер 2 4 и большие доставка или
3 $
Выключатель для формованного корпуса Schneider NSX100N 50KA AC 3P3D 25A TMD новая модель C10N3TM025
Буф2-.. М .. Краны
Оптовая продажа высококачественный сублимированный клубничный порошок Заводская поставка
5,50-6,40 $