Сохранить в закладки 1601092735828:
No. | (Item) | (Specification) | (Specification) | |||||||||||
5-1 | Operating Voltage | 7.4V | 8.4V | |||||||||||
5-2 | No Load Speed±10% | 0.263sec/60°(38RPM) | 0.222sec/60°(45RPM) | |||||||||||
5-3 | ±10% Running Current ( no load) | 600mA | 800mA | |||||||||||
5-4 | Stall Torque (at locked) | 85kg.cm | 95kg.cm | |||||||||||
1182.5oz.in | 1321.6oz.in | |||||||||||||
5-5 | ±10% Stall Current (at locked) | 8A | 9.5A | |||||||||||
5-6 | ±10% Idle Current (at stopped) | 26mA | 26mA | |||||||||||
5-7 | Input Voltage Range | 6V-9V | ||||||||||||
5-8 | Rated Torgue | 21kg.cm | 23.5kg.cm | |||||||||||
5-9 | Rated Current | 2000mA | 2400mA | |||||||||||
5-10 | Kt | 10kg.cm/A |
No. | (Item) | (Specification) | ||||||||
6-1 | Size | 59X29X55mm | ||||||||
6-2 | Limit Angle | No limit | ||||||||
6-3 | Case material | Aluminum | ||||||||
6-4 | Gear material | Steel | ||||||||
6-5 | Bearing type | Ball bearings | ||||||||
6-6 | Angle Sensor | Type | Carbon-Film Potentiometer | |||||||
6-7 | Connector and Cable | Type | JR | |||||||
Material | PVC | |||||||||
Length | 30±0.5CM | |||||||||
Pin Definition | 1 | Signal | ||||||||
2 | Vcc | |||||||||
3 | GND | |||||||||
6-8 | The Weight | 195.9g± 1g | ||||||||
6-9 | Horn Type | 15T/7.6mm | ||||||||
6-10 | Gear Ratio | 1/374 | ||||||||
6-11 | Back Lash | ≦0.5° | ||||||||
6-12 | The rocker phantom | 0° | ||||||||
6-13 | The rocker screw | M3X6 | ||||||||
6-14 | Motor | Core Motor |
No. | (Item) | (Specification) | ||||||||||
7-1 | Command Signal | Pulse width modulation | ||||||||||
7-2 | Control System Type | Digital comparator | ||||||||||
7-3 | Operating Travel | 180±5°(at 500→2500μsec) | ||||||||||
7-4 | Left&Right Travelling Angledeviation | ≤ 5° | ||||||||||
7-5 | Centering Deviation | ≦1° | ||||||||||
7-6 | Neutral Position | 1500 μsec | ||||||||||
7-7 | Dead Band Width | ≤4 μsec | ||||||||||
7-8 | Rotating Direction | Counterclockwise(At500→2500 μsec) | ||||||||||
7-9 | Pulse Width Range | 500→2500 μsec | ||||||||||
7-10 | Electronic Protection | Stall 8sec |
Robot arm
1. What is the delivery time?
Normally, 1-5 workdays after payment; Special requirement orders, delivery time is negotiable.
2.If the products can't work after receiving it,what should I do?
We will replace new items for you at once and then we make the judgement for the issue.
3.If the products don't meet my demand after I received it,can I return it?
Yes,no problem.You can return back to us, we will refund your full payment.
4.what is the warranty?
1-3 months to replace new items for free, 1-2 years repairing free according to different products.
5.Do you accept OEM/ODM?
Yes,we do.We can produce according to your requirement.
6.Are you a manufacturer?
Yes,we are.
Новинки товаров от производителей по оптовым ценам