4 в 1 сварочный аппарат с воздушным охлаждением 1500 Вт
2 500,00-2 980,00 $
Сварочная станция сварочного аппарата лазера 1500 Вт воздушного охлаждения волоконно лазерный сварочный аппарат
- Категория: >>>
- Поставщик: Shandong Jowuey Intelligent Equipment Co. LtdShandong Ltd
Сохранить в закладки 1601106812947:
Описание и отзывы
Характеристики
Air-cooled handheld welding machines
Our air-cooled continuous fiber lasers are independently developed and produced by Reci. Compared with traditional gas and solid lasers, the products have the characteristics of electro-optical conversion efficiency and superior beam quality. At the same time, due to the coilability of optical fibers, the structure of fiber lasers is more compact. This series of products combines the advantages of high photoelectric conversion efficiency, high output power, excellent beam quality, compact structure, maintenance-free, and low cost. It can be widely used in industrial processing such as metal welding, military and national defense, scientific research and other scenarios.
TECHNICAL PARAMETERS
NO | Item | Date | ||||
1 | Model | A80,A120,A150,A200 | ||||
2 | Rated power (At current 19A) | 700W,1000W,1300W,1800W | ||||
3 | Maximum output power (At current 22.5A) | 800W,1200W,1500W,2000W | ||||
4 | Operating mode | 24 hours continuously | ||||
5 | Output power adjustment range(%) | 10-100 | ||||
6 | central wavelength | 1080±3 | ||||
7 | Power instability during continuous operation (%) (Initial power and power after 1 hour of operation) | ≤1 | ||||
8 | Power instability under different working conditions (%)(Comparison between ambient temperature base 0℃ and 40℃) | ≤3 | ||||
9 | Maximum modulation frequency (kHz) | 20 | ||||
10 | Indicates red light power (mV) | ＞0.5 | ||||
11 | Output armor length (m) | Standard 5m/10m can be customized | ||||
12 | Working voltage (VAC) | AC 220V 50/60Hz | ||||
13 | Working temperature range(℃) | -20-40 | ||||
14 | Relative humidity(%) | <90 | ||||
15 | cooling method | Air cooling | ||||
16 | stored temperature | -20-60 | ||||
PRODUCT CONFIGURATION
It is 7 times more efficient than traditional argon arc welding. 14 micron core diameter optical fiber output, fundamental mode spot, good optical quality, penetration depth 1.5 times that of other water-cooled lasers of the same power, high electro-optical efficiency, the electro-optical efficiency of the whole machine is 38%, pure air-cooled compact structure design.
Welding machine and wire feeding are integrated
Touch screen
welding gun
APPLICATION
Main application industries:
Industrial processing, such as metal cutting, welding, cleaning and rust removal, etc.
Military defense, scientific research, etc.
Industrial processing, such as metal cutting, welding, cleaning and rust removal, etc.
Military defense, scientific research, etc.
FLOOR PLAN
COMPANY INFORMATION
FAQ
1. How many commonly used protective gases are there?
There are two types of nitrogen or argon:
--It is recommended to use nitrogen for stainless steel, carbon steel, galvanized sheets and cold-rolled sheets for better welding effect;
--It is recommended to use argon gas for aluminum, copper and titanium alloys for better welding effect. For titanium alloys, argon gas can effectively reduce the cracks caused by the embrittlement of the weld after welding.
2. When welding aluminum plates, do I need to re-find the laser focus?
Yes, because aluminum is a highly reflective material, the focus is different from stainless steel, carbon steel, etc.
3. Do I need to clean the lens in time to protect it from stains?
Yes, it needs to be cleaned and replaced in time, otherwise it will cause damage to the welding gun and even the welding machine.
There are two types of nitrogen or argon:
--It is recommended to use nitrogen for stainless steel, carbon steel, galvanized sheets and cold-rolled sheets for better welding effect;
--It is recommended to use argon gas for aluminum, copper and titanium alloys for better welding effect. For titanium alloys, argon gas can effectively reduce the cracks caused by the embrittlement of the weld after welding.
2. When welding aluminum plates, do I need to re-find the laser focus?
Yes, because aluminum is a highly reflective material, the focus is different from stainless steel, carbon steel, etc.
3. Do I need to clean the lens in time to protect it from stains?
Yes, it needs to be cleaned and replaced in time, otherwise it will cause damage to the welding gun and even the welding machine.
Похожие товары
2024 батарейный блок питания латунный медный сканер кольцо cw волоконно-лазерный сварочный аппарат 1 5 кВт 2 3 4
13 000,00 $
1500 Вт импульсный лазерный автоматический сварочный аппарат гальванометр
1 599,00-1 999,00 $
300 Вт лазерная сварочная машина для письма из нержавеющей стали, профили, 3D слово, сварка, продажа, лазерная сварка, сварочный аппарат
200 Вт Yag Золотой Серебряный металлический зубной YAG импульсный ювелирный лазерный сварочный аппарат
2 750,00-2 850,00 $
18650 аккумуляторная батарея для волоконного лазерного сварочного аппарата
36 000,00 $
Новый 20000 Вт высокомощный лазерный сварочный аппарат Raycus с воздушным охлаждением и простотой в эксплуатации гарантией на 2 года
Недорогая 100 Вт лазерная сварочная машина Sisma Alpha Laserstar Orlaser
4 200,00-5 000,00 $
Новые поступления
Новинки товаров от производителей по оптовым ценам
Светлая Золотая морская солнечная энергия ландшафтное украшение постмодерн минималистский стиль чистая ручная роспись маслом 24x3 1 дюйм/60x80
35-53 $
Европейские антикварные простой Последние двойной металлической кровати
Автоматизированная складская система автоматического хранения в Гуанчжоу Eyda с эффективными стеллажами и
10 000-35 000 $
Декоративный чехол для PS5 Сменный Чехол консоли пластины Playstation5 пылезащитный с защитой от царапин
7,50-7,70 $
Лучшее качество детские подгузники для сухих подгузников новорожденных размер 2 4 и большие доставка или
3 $
Выключатель для формованного корпуса Schneider NSX100N 50KA AC 3P3D 25A TMD новая модель C10N3TM025
Буф2-.. М .. Краны
Оптовая продажа высококачественный сублимированный клубничный порошок Заводская поставка
5,50-6,40 $