Дозирующий пистолет для 10:1 клея 50 мл 75

1.Where to buy Wellmid glue ?
Sign up for a free Alibaba membership and you can buy it right away.or leave a message and we'll give you the right guidance

2.What are my payment methods?
You can pay by Credit or Debit card online, or by wire transfer.Credit or debit card online payment processing time 1-2 hours.
The wire transfer processing time is 3-7 Business Days.

3.When is it safe to use what i've repaired or made?
All glues have a period over which the "bond strength" increases to its maximum - even super or instant glues.Check your pack for details.

4.How strong is glue?
The right glue, properly applied, will give you a permanent fix as strong as any mechanical device.

5.To be safe i used even more glue than was recommended but it still didn't work.why not?
Actually too much glue doesn't help and doesn't usually produce a neat finish.Also check whether you should be applying to one surface or both.Always follow the product instructions on your pack.

6.I'm worried about the effects of accidentally inhaling fumes.should i be?
All adhesives are safe when handled according to guidelines. It's always best to work in a well-ventilated area but there's no danger from fumes.

7.Are glues safe for my children to use?
Instant or rapid bond glues are best used under supervision for younger children but all glues are safe when handled according to Wellmid guidelines. There are glues recommended for art and craft materials like paper, cardboard and fabrics.

8.Will the adhesive cure at low temperature ?
Wellmid adhesives are not recommended to be used at temperatures below 10°C.The curing times given on the packs are for a temperature of 23°C, if the temperature is lower, the cure will take longer.

9.Are there any adhesive suitable to bond pp, pe or ptfe ?
Yes.Wellmid 3010 is capable of bonded this plastics
PP = Polypropylene
PE = Polyethylene
PTFE = Polytetrafluorethylene

10.How do i remove cured residues of Wellmid Glue ?
Uncured residues can be removed using warm water and soap water.
Cured residue or exuded adhesive may be destroyed by immersion in commercial paint strippers, such as Nitromors or Multistrip.NOTE : Care should be taken in using the chemicals given above since they may be hazardous to handle or inflammable, and may also attack the substrate.

11.The surface of the cured Wellmid epoxy adhesive remains sticky, is it fully cured ?
If the adhesive remains sticky on the surface left open to air, it does not necessarily means that the adhesive is not fully cured.Under certain conditions, the hardener can react with carbon dioxide in the air and leave a sticky layer on the surface of the cured adhesive.Normally this layer can be easily removed with a wet cloth.

12.The Wellmid epoxy adhesive does not cure.
Problems with our epoxy adhesives are often caused by a wrong mix ratio between the resin and the hardener, if you use tubes, the quantity of resin and hardener is sometimes difficult to evaluate.If you use syringes, we recommend to extract the small amount of air which may be present in the syringe before extruding the product.

Which glue is right for you?
The following table shows the performance of some of our products, you can choose the right products according to your needs.For your better browsing, please download pictures to browse. You can also contact us to obtain Excel documents for better product selection.
1. About the chemical, color and mix ratio of glue.

2. About the viscosity, state, pot life and cure condition of glue.

3. About the tack free time, cure time, operating temperature and glass transition temperature of glue.

4. About the strength and resistance of glue.

5. About the bonding materials of glue.

6. About the packing specification of glue.