Надувной замок с единорогом Радужный пони

Inflatable castle/slide for your yard or indoor, whether in winter or summer enjoy the fun of bouncing. Give the rein to your kids' imagination, this inflatable slide can be anything.Not only does it exercise children's physical coordination and flexibility, it also promotes social skills and teamwork, and children can play with other friends, interact and share fun! Rich colors,interesting designs,trustworthy quality.We can design any inflatable toys you imagine, Contact us and we have a very good price

product information table

product pictureMore styles, you can choose, we can also customize production for you

Inflatable castle installation

1. The bottom of the inflatable castle is prohibited from direct contact with the ground. A mat (such as carpet, color strips, etc.) should be placed under the equipment to prevent friction with the ground, causing damage to the product and shortening the product use time. Place the bouncy castle on a flat bedding and spread it out as required by the terrain.

2. find the air inlet of the inflatable castle, and then connect with the fan outlet, and tighten the fan port, and then tie the remaining spare air inlet.

3. Turn on the hair dryer and the bouncy castle will be fully deployed within 5-10 minutes.

Maintenance

1. In order to ensure that your equipment has reached the normal service life, you should not take part in too many children during the startup. Normally hold 3 square meters of a child on the air mode.

2. The small molding on the facilities can be decorative, so the child cannot be pulled hard and torn to avoid damage.

3. When children play, they can't let their children scribble on the equipment to avoid damage.

4. If the equipment is broken, apply special adhesive to the broken and spare PVC materials.  After 5 minutes of glue, it will not be sticky, glue it together, squeeze it properly and use it for a few minutes.

5. The air pressure on the device is too soft, check for excessive air leakage, tear, or power failure; The air pressure is too hard to keep the inlet of the fan out a bit.