Kaisi 37045 7-45X непрерывный зум стерео тринокулярный микроскоп PCB для ремонта электронных печатных плат
11 481,98 ₽ - 13 027,63 ₽
Индивидуальные шпильки из карбида вольфрама Hpgr
- Категория: >>>
- Поставщик: Zhuzhou Better Tungsten Carbide Co. Limited
Сохранить в закладки 1601132562603:
Описание и отзывы
Характеристики
Description of carbide HPGR studs:
1. HPGR is an energy-efficient crushing equipment used to reduce particles by compressing and crushing the feed between two counter rotating, parallel rollers with a small gap between them. HPGR is widely used in grinding cement clinker, limestone, bauxite, iron ore..The tungsten carbide HPGR studs are installed in high pressure grinding roller as the wear roller surface to grinding those stone or ore.
2. Tungsten carbide studs also called cemented carbide studs, carbide buttons and carbide studs for HPGR. The tungsten carbide HPGR STUDS which made from tungsten carbide will inlaid on the body of the high pressure grinding roller. Tungsten carbide studs roller has a service life more than 6 times longer than that of the surfacing roller surface.
3. The wear-resistant layer is made of tungsten-cobalt hard alloy studs and inlaid on the body. Generally up to HRC67 or higher, the hardness is much higher than that of the PTA layer roller surface and the centrifugal casting composite roll surface, and the matrix of the stud roller surface can be well protected by the material lining formed. Tungsten carbide studs roller has a service life more than 6 times longer than that of the surfacing roller surface.
2. Tungsten carbide studs also called cemented carbide studs, carbide buttons and carbide studs for HPGR. The tungsten carbide HPGR STUDS which made from tungsten carbide will inlaid on the body of the high pressure grinding roller. Tungsten carbide studs roller has a service life more than 6 times longer than that of the surfacing roller surface.
3. The wear-resistant layer is made of tungsten-cobalt hard alloy studs and inlaid on the body. Generally up to HRC67 or higher, the hardness is much higher than that of the PTA layer roller surface and the centrifugal casting composite roll surface, and the matrix of the stud roller surface can be well protected by the material lining formed. Tungsten carbide studs roller has a service life more than 6 times longer than that of the surfacing roller surface.
Type Specification of carbide HPGR studs:
1. Flat top, Domed top, With tip top, Hemispherical top
2. We can produce as your drawing or sample.
3. Diameter: 16mm to 32mm, we also have 9mm studs
4. Length: 20mm, 25mm, 30mm, 35mm, 40mm, 45mm
5. Surface: blank ,ground, tumble polished
2. We can produce as your drawing or sample.
3. Diameter: 16mm to 32mm, we also have 9mm studs
4. Length: 20mm, 25mm, 30mm, 35mm, 40mm, 45mm
5. Surface: blank ,ground, tumble polished
Grade Information of carbide HPGR studs
1. Grades below are exclusive grades we developed for HPGR. Good wear resistance and high strength are suitable for metal smashing with high working efficiency.
ZZBT Grade | Density (g/cm3) | Hardness (HRA) | T.R.S (MPα) | Recommended Application |
UBT92 | 14.65 | 88.2 | 2560 | For grinding soft and middle hard stones or mines |
UBT89 | 14.35 | 87.0 | 2850 | For grinding soft and middle hard stones or mines |
UBT85 | 14.20 | 85.5 | 2500 | For grinding hard stones or mines |
Delivery Time:
within 7 days for stock sizes around 15 days for non-stock products, depending on types and quantity
Shipping method:
By express (DHL, TNT, FedEx, UPS, etc), By Air, By Sea
FAQ of carbide HPGR studs
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally within 7 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
A: We are factory.
Q: How long is your delivery time?
A: Generally within 7 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000 USD, 100% in advance. Payment>=1000 USD, 30% T/T in advance, balance before shipment.
A: Payment<=1000 USD, 100% in advance. Payment>=1000 USD, 30% T/T in advance, balance before shipment.
Похожие товары
Высококачественное лезвие из вольфрамовой стали SS10 с твердосплавными насадками для резки камня в карьере и саду по конкурентоспособным ценам
5 188,97 ₽ - 5 520,18 ₽
T5 YT15 C1 твердосплавные Паяные наконечники режущие вставки ПАЯЛЬНЫЕ НАКОНЕЧНИКИ из карбида вольфрама
4 416,15 ₽ - 5 299,38 ₽
Осциллирующий нож из карбида вольфрама E17C для автоматизированного цифрового резака IECHO
176,65 ₽ - 220,81 ₽
400 мм гранитный алмазный режущий диск для резки плитки бесшумное Лезвие Гранита
3 488,76 ₽ - 3 532,92 ₽
7 дюймов 180 мм ручной пылесборник Обложка резиновый пылезащитный кожух для ручная шлифовальная
1 932,07 ₽ - 1 987,27 ₽
Djk 10-25 25-35 35-50 Штекерный разъем для сварочного кабеля
33,13 ₽ - 110,41 ₽
100% натуральный материал карбид вольфрама маленькая пластина полированный карбидный лист
2 439,92 ₽ - 2 704,89 ₽
Новые поступления
Новинки товаров от производителей по оптовым ценам
Выключатель для формованного корпуса Schneider NSX100N 50KA AC 3P3D 25A TMD новая модель C10N3TM025
Буф2-.. М .. Краны
Оптовая продажа высококачественный сублимированный клубничный порошок Заводская поставка
5,50-6,40 $
Инструмент для снижения ударов и вибраций бурения на месторождениях гидравлические амортизирующие Подводные устройства с радиальным осевым направлением
12 000-14 000 $
Резьбовые титановые трубы ПВХ оболочка теплообменника для тепловой насос плавательного бассейна охладитель аквариума испарителя
147-182 $
Корица специи продукты Конкурентоспособная цена на экспорт из Вьетнама оптовая продажа высокое качество корица натуральные
5,50-6,40 $
Цепь из нержавеющей стали с большим шагом сверхпрочная цепь трансмиссии C2052/C2062/C2082 промышленная гибочная
