Сохранить в закладки 1601199169698:
1. Model No. | KV | 80 | |||
Input Voltage | 3-10S Lipo (12.6V-42V) | Idle Current | 0.8A | ||
Max Output Watt | 3550W | Max Current | 65A | ||
Shaft | φ8mm, No Output Shaft | Hall Sensor | Without | ||
Mounting Hole Pattern | 28mm, 30mm, 44mm Hole distance | Mounting Hole Diameter | M4 | ||
Customize | KV, logo, shaft, mounting hole pattern, color, connector, cable, etc., | Bearing | Stainless Steel Bearings | ||
Application | Wing foil, wind surf foil, sup foil board, non-electric foil board, kite foil board, underwater thruster, underwater robot, ROV, etc., |
2. Model No. | MTSF130A-WP32 with Progcard-FP32 | Cont Current | 130A | ||
Input Voltage | 6-14S Lipo (25-58.8V) | Burst Current | 150A | ||
Size | 96.5*58.5*23.5mm | Waterproof Rank | IP68 | ||
Net Weight | 340g | Application | Electric Surfboard /Efoil /Foil assist /tow boogie/ underwater thruster /electric sup board/RC Boat/Foil Board, etc., | ||
Recommend motors: | Suitable for: MTO6374-80-WPC/C2 Waterproof Ourunner Motors. If use with Maytech 6374 80KV Motor, max Voltage is 10S Lipo (max 42V). |
3. Model No. | PCB and Screen Waterproof Rank | IP67 | |||
Input Voltage | Max 75V | Signal | PWM (PPM) | ||
UART | With TX and RX port to connect VESC controllers | Double Source Power Supply | Accept 5V power by ESC built in BEC or extra 5V power | ||
Control Pump | Yes (Relay Switch) on receiver | Control Light | Yes (Transistor Switch) | ||
Cruise Control Funtion | With in Esurf Mode | Accessories | Charging Pad; Receiver; 3pcs Dupont Cables | ||
Display Screen | Remote & Battery Voltage; Throttle Percentage; Signal Strength; RPM. When work with VESC, also display Current; Temp; Volt; Speed&Distance(only for esk8 mode) or RPM (for esurf mode). |
Новинки товаров от производителей по оптовым ценам