1. Thoroughly wash and dry car using a cleaning solution designed for automotive finishes.
2. Polish and degrease to remove dull, weathered, scratched, and stained paint surface to achieve mirror
like finish before applying liquid coating.
3. Shake ceramic coating well before use. Wrap suede around the applicator block on sponge side. Drag
one line of ceramic coating down the suede while it’s on the applicator block. Spread evenly over a 2’
x 2’ section of the painted surface at a time in criss-cross motions until one panel is treated. Reapply
coating on the suede as needed.
4. Use clean and dry microfiber cloth to wipe away liquid coating on the car in circular motions as soon
as it flashes (this could take up to 5 minutes depending on temperature and humidity). Be sure to
remove all excessive residue and only then do you move to the next panel.
5. Repeat the process panel by panel until car is fully coated and wiped off.
6. Replace the suede wrapped around applicator block as needed.
Caution
a. The coating dries out quickly during application. Please only apply one panel at one time. Polish the
applied panel before the coating completely dries. If the coated liquid is cured, it will be extremely
difficult to be removed, and grinding and polishing may be required.
b. Do Not touch the newly coated surface within 2 hours. Keep the newly coated surface away from
water for at least 24 hours. Do not wash the car within 3 days to ensure the optimal durability.
c. If the paintwork is in poor condition, grinding and polishing is recommended to get an optimal coating
effect.
d. This product is flammable. Store it in a cool and well-ventilated area and avoid direct sunlight.