Сохранить в закладки 1601244556378:
Model Specification | LS-200-12 | |||||||||||||
DC output voltage | 12V | |||||||||||||
Output voltage error | ±1% | |||||||||||||
Rated output current | 16.7A | |||||||||||||
Output current range | 0-16.7A | |||||||||||||
Wave and noise | 150mV | |||||||||||||
Inlet stability | ±0.5% | |||||||||||||
Load stability | ±0.5% | |||||||||||||
DC output power | 200W | |||||||||||||
Efficiency | 85% | |||||||||||||
Adjustable range for DC voltage | 10-13.2V | |||||||||||||
AC input voltage range | 180~264VAC | |||||||||||||
Input current | 2.5A/230V | |||||||||||||
AC impulse current | 50A/230V | |||||||||||||
Leakage current | <3.5mA/240VAC | |||||||||||||
Overload protection | 105%~135%. Type,PULSING HICCUP SHUTDOWN; Reset,auto recovery | |||||||||||||
Over-voltage protection | 13.8-16.2V | |||||||||||||
High-temperature protection | RTH3>=65°C FAN ON<=55°C FAN OFF>=80°CCut off output(5~15V) | |||||||||||||
RTH3>=70°C FAN ON<=60°C FAN OFF>=85°CCut off output(24~48V) | ||||||||||||||
Temperature coefficient | ±0.03%°C(0~50°C) | |||||||||||||
Setup rise hold up time | 200ms,50ms,20ms | |||||||||||||
Vibration | 10~500Hz,2G 10min./1cycle,Period for 60min,EACH AXES | |||||||||||||
Withstand voltage | Input and output interval,1.5KVAC,Input and enclosure,1.5KVAC,Output and enclosure,0.5KVAC | |||||||||||||
Isolation resistance | Input and output interval,Input and enclosure,Output and enclosure,500VAC/100M Ohms | |||||||||||||
Working temperature and humidity | -10°C~+50°C,20~90%RH | |||||||||||||
Store temperature and humidity | -20°C~+85°C,10~95%RH | |||||||||||||
Overall dimension | 208*63*29mm | |||||||||||||
Weight | 340g /40pcs per carton | |||||||||||||
EMC standards | EN55015,EN55022,EN55024,EN61000-2,EN61000-3,EN61547 approved | |||||||||||||
Note,1.The testing condition for the parameter above is,230VAC input, rated load,25°C 70%Rh,Humidity | ||||||||||||||
2.Error,include the setting error, line stability and load stability.(Note,5) | ||||||||||||||
3.Wave test,adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting | ||||||||||||||
4.Inlet voltage stability test, when is over load, the lowest voltage of inlet is representative to the highest voltage. | ||||||||||||||
5.Load stability test: The load is from 0% to 100%,others 60%. | ||||||||||||||
6.C2,3,11must be knocked down. | ||||||||||||||
Новинки товаров от производителей по оптовым ценам





